EN 1706 Grade AC-51000 F

Want to keep this datasheet? Save it now in your required format

Description

Material EN AC-AlMg3(b) is produced as sand and die cast. It shows the following casting characteristics and properties: plasticity: acceptable heat crack resistance: insufficient pressure tightness: insufficient workability (after heat-treatment): excellent corrosion resistance: excellent decorative anodic oxidation: excellent weldability: acceptable polishability: acceptable strength at room temperature: insufficient strength at increased temp. (up to 200°C): good ductility (impact strength): good fatigue strength amounts 60 to 90 N/mm² ( best available casting method, values for vibration durability up to 50*10 hoch 6 cycles [Woehler diagram]).

Related Standards

EN 1706

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards
Dichte	20.0 °C	2.7 g/cm³ Show Material materials with Dichte of 2.7 g/cm³	F	EN 1706

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending Fatigue Strength		60.0 - 90.0 MPa Show Material materials with Bending Fatigue Strength of 60.0 - 90.0 MPa	F	EN 1706	Casting
Elastizitätsmodul		68.0 - 70.0 GPa Show Material materials with Elastizitätsmodul of 68.0 - 70.0 GPa				Typical for Cast 5xx.x Series Aluminium
Härte, Brinell		50.0 [-] Show Material materials with Härte, Brinell of 50.0 [-]	F	EN 1706	Casting
	20.0 °C	50.0 [-] Show Material materials with Härte, Brinell of 50.0 [-]	F	EN 1706
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Cast 5xx.x Series Aluminium
Zugfestigkeit		140.0 MPa Show Material materials with Zugfestigkeit of 140.0 MPa	F	EN 1706	Casting
		150.0 MPa Show Material materials with Zugfestigkeit of 150.0 MPa	F	EN 1706	Casting
	20.0 °C	140.0 MPa Show Material materials with Zugfestigkeit of 140.0 MPa	F	EN 1706
	20.0 °C	150.0 MPa Show Material materials with Zugfestigkeit of 150.0 MPa	F	EN 1706

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung	20 °C	2.4e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.4e-05 1/K	F	EN 1706	Casting
	100.0 °C	2.4e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.4e-05 1/K	F	EN 1706	Casting
	100 °C	2.4e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.4e-05 1/K	F	EN 1706	Casting
Schmelzpunkt		450.0 - 640.0 °C Show Material materials with Schmelzpunkt of 450.0 - 640.0 °C				Typical for Cast 5xx.x Series Aluminium
Spezifische Wärmekapazität		963.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 963.0 J/(kg·K)				Typical for Cast 5xx.x Series Aluminium
Wärmeleitfähigkeit	20.0 °C	130.0 - 140.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 130.0 - 140.0 W/(m·K)	F	EN 1706	Casting

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit	20.0 °C	17000000.0 - 22000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 17000000.0 - 22000000.0 S/m	F	EN 1706	Casting
spezifischer Widerstand		4.55e-08 - 5.88e-08 Ω·m Show Material materials with spezifischer Widerstand of 4.55e-08 - 5.88e-08 Ω·m	F	EN 1706	Casting

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminium	94.4 % Show Material materials with Aluminium of 94.4 %	F	EN 1706
Eisen	0.55 % Show Material materials with Eisen of 0.55 %	F	EN 1706
	0.55 % Show Material materials with Eisen of 0.55 %	F	EN 1706	Casting
Kupfer	0.1 % Show Material materials with Kupfer of 0.1 %	F	EN 1706	Casting
Magnesium	2.5 - 3.5 % Show Material materials with Magnesium of 2.5 - 3.5 %	F	EN 1706	Casting
Mangan	0.45 % Show Material materials with Mangan of 0.45 %	F	EN 1706	Casting
Silizium	0.55 % Show Material materials with Silizium of 0.55 %	F	EN 1706	Casting
Titan	0.2 % Show Material materials with Titan of 0.2 %	F	EN 1706	Casting
Zink	0.1 % Show Material materials with Zink of 0.1 %	F	EN 1706	Casting

Technological properties

Property
Anodizing	decorative: excellent
Corrosion properties	general: excellent
General machinability	after thermal treatment: excellent
Processing methods	permanent mould casting, separately cast test sample