DIN 1725-1 Grade 3.0505 O

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn0,5Mg0,5 is special one for the packing planned alloy. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occur by cold forming. It is very well warm and cold formable and is very well suitable to the deep-drawing (no lappet formation). Because of the good Erichsen index and the relatively high strength (F 24), it finds in addition in architecture use. Standardised is this alloy as sheet metal or strip with a thickness of max. 0,35 mm (DIN 1788). Application: In the packing for menu bowls, light container, bottle caps, doses dose covers as well as in architecture as profile boards for roofs and wall linings and for shutters and suspended covers. For heat exchangers and flexible pipes.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte		2.71 g/cm³ Show Material materials with Dichte of 2.71 g/cm³	O	EN 573-3, EN 1396, EN 485
		2.72 g/cm³ Show Material materials with Dichte of 2.72 g/cm³	O	EN 573-3, EN 1396, EN 485
	20.0 °C	2.71 g/cm³ Show Material materials with Dichte of 2.71 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Biegewinkel 180°		0.5 °/t Show Material materials with Biegewinkel 180° of 0.5 °/t	O	EN 573-3, EN 485
Elastizitätsmodul		69.0 GPa Show Material materials with Elastizitätsmodul of 69.0 GPa	O	EN 573-3, EN 1396, EN 485
		70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	O	EN 573-3, EN 1396, EN 485
Härte, Brinell		29.0 [-] Show Material materials with Härte, Brinell of 29.0 [-]	O	EN 573-3, EN 485
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Schubmodule		25.0 - 26.0 GPa Show Material materials with Schubmodule of 25.0 - 26.0 GPa				Typical for Wrought 3000 Series Aluminium
Zugfestigkeit		100.0 - 155.0 MPa Show Material materials with Zugfestigkeit of 100.0 - 155.0 MPa	O	EN 573-3, EN 1396, EN 485
	20.0 °C	110.0 - 150.0 MPa Show Material materials with Zugfestigkeit of 110.0 - 150.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung	20 °C	2.36e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.36e-05 1/K	O	EN 573-3, EN 1396, EN 485
	100 °C	2.36e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.36e-05 1/K	O	EN 573-3, EN 1396, EN 485
Schmelzpunkt		635.0 - 655.0 °C Show Material materials with Schmelzpunkt of 635.0 - 655.0 °C	O	EN 573-3, EN 1396, EN 485
		640.0 - 655.0 °C Show Material materials with Schmelzpunkt of 640.0 - 655.0 °C	O	EN 573-3, EN 1396, EN 485
Spezifische Wärmekapazität		893.0 - 920.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 893.0 - 920.0 J/(kg·K)				Typical for Wrought 3000 Series Aluminium
Wärmeleitfähigkeit		160.0 - 190.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 160.0 - 190.0 W/(m·K)	O	EN 573-3, EN 1396, EN 485
		172 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 172 W/(m·K)	O	EN 573-3, EN 1396, EN 485
	20.0 °C	180.0 - 190.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 180.0 - 190.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4	Flat

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit		23000000.0 - 26000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 23000000.0 - 26000000.0 S/m	O	EN 573-3, EN 1396, EN 485
		26000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 26000000.0 S/m	O	EN 573-3, EN 1396, EN 485
	20.0 °C	25000000.0 - 27000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 25000000.0 - 27000000.0 S/m	O	DIN 1725-1, EN 573-3, EN 573-4	Flat
spezifischer Widerstand		3.85e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.85e-08 Ω·m	O	EN 573-3, EN 1396, EN 485
		3.85e-08 - 4.35e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.85e-08 - 4.35e-08 Ω·m	O	EN 573-3, EN 1396, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.2 % Show Material materials with Chrom of 0.2 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Eisen	0.7 % Show Material materials with Eisen of 0.7 %	O	DIN 1725-1, EN 573-3, EN 573-4	Flat
	0.70 % Show Material materials with Eisen of 0.70 %	O	EN 573-3, EN 1396, EN 485
Kupfer	0.3 % Show Material materials with Kupfer of 0.3 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Magnesium	0.2 - 0.8 % Show Material materials with Magnesium of 0.2 - 0.8 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Mangan	0.3 - 0.8 % Show Material materials with Mangan of 0.3 - 0.8 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Silizium	0.6 % Show Material materials with Silizium of 0.6 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Titan	0.1 % Show Material materials with Titan of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat
Zink	0.4 % Show Material materials with Zink of 0.4 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485	Flat

Technological properties

Property

Workability

Good workability.