DIN 1725-1 Grade 3.0525 O

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn1Mg0,5 is similarly to AlMn1 in its properties. It reaches strength up to F 25. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occure by cold forming. It is very well hot and cold formable and is suitable to the deep-drawing (no lappet formation). The alloy AlMn1Mg0,5 is very well corrosion resistant and is sea water steady. As semi-finished material it is present in accordance with DIN 1788 and DIN 1745 only as sheet metal or strip. Application: Mainly in the packing for cans (lower parts), for menu bowls, for covers. In the building industry for claddings, roofings, for sun protection facilities (roller schutter, lamella net curtain) and for roll gates as well as for flexible pipes and in the construction of vehicles.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte		2.72 g/cm³ Show Material materials with Dichte of 2.72 g/cm³	O	EN 573-3, EN 1396, EN 485, EN 546
	20.0 °C	2.72 g/cm³ Show Material materials with Dichte of 2.72 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Rod

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Biegewinkel 180°		1.0 °/t Show Material materials with Biegewinkel 180° of 1.0 °/t	O	EN 573-3, EN 485
Biegewinkel 90°		0.5 °/t Show Material materials with Biegewinkel 90° of 0.5 °/t	O	EN 573-3, EN 485
		1.0 °/t Show Material materials with Biegewinkel 90° of 1.0 °/t	O	EN 573-3, EN 485
Dehnung		8.0 % Show Material materials with Dehnung of 8.0 %	O	EN 573-3, EN 546		A50
		9.0 % Show Material materials with Dehnung of 9.0 %	O	EN 573-3, EN 546		A50
		10.0 % Show Material materials with Dehnung of 10.0 %	O	EN 573-3, EN 546		A50
		12.0 % Show Material materials with Dehnung of 12.0 %	O	EN 573-3, EN 1396, EN 485		A50
		14.0 % Show Material materials with Dehnung of 14.0 %	O	EN 573-3, EN 1396, EN 485		A50
		16.0 % Show Material materials with Dehnung of 16.0 %	O	EN 573-3, EN 1396, EN 485		A50
		19.0 % Show Material materials with Dehnung of 19.0 %	O	EN 573-3, EN 485		A50
	20.0 °C	13.0 % Show Material materials with Dehnung of 13.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Flat	A100
	20.0 °C	15.0 % Show Material materials with Dehnung of 15.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Flat	A100
	20.0 °C	17.0 % Show Material materials with Dehnung of 17.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Rod	A10
	20.0 °C	22.0 % Show Material materials with Dehnung of 22.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Flat	A10
	20.0 °C	23.0 % Show Material materials with Dehnung of 23.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Rod
Elastizitätsmodul		70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	O	EN 573-3, EN 1396, EN 485, EN 546
	20.0 °C	65.0 GPa Show Material materials with Elastizitätsmodul of 65.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Rod
Härte, Brinell		33.0 [-] Show Material materials with Härte, Brinell of 33.0 [-]	O	EN 573-3, EN 485
	20.0 °C	35.0 [-] Show Material materials with Härte, Brinell of 35.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Rod
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Schubmodule	20.0 °C	26.5 Show Material materials with Schubmodule of 26.5	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Rod
Zugfestigkeit		115.0 - 165.0 MPa Show Material materials with Zugfestigkeit of 115.0 - 165.0 MPa	O	EN 573-3, EN 1396, EN 485
	20.0 °C	120.0 - 165.0 MPa Show Material materials with Zugfestigkeit of 120.0 - 165.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Rod
	20.0 °C	125.0 - 165.0 MPa Show Material materials with Zugfestigkeit of 125.0 - 165.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, EN 546	Flat

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape
Koeffizient der thermischen Ausdehnung	20 °C	2.3199999999999998e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3199999999999998e-05 1/K	O	EN 573-3, EN 1396, EN 485, EN 546
	100 °C	2.3199999999999998e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3199999999999998e-05 1/K	O	EN 573-3, EN 1396, EN 485, EN 546
Schmelzpunkt		630.0 - 654.0 °C Show Material materials with Schmelzpunkt of 630.0 - 654.0 °C	O	EN 573-3, EN 1396, EN 485, EN 546
Spezifische Wärmekapazität	20.0 °C	893.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 893.0 J/(kg·K)	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Rod
Wärmeleitfähigkeit		160.0 - 190.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 160.0 - 190.0 W/(m·K)	O	EN 573-3, EN 1396, EN 485, EN 546
	20.0 °C	200.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 200.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Rod

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit		23000000.0 - 25000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 23000000.0 - 25000000.0 S/m	O	EN 573-3, EN 1396, EN 485, EN 546
	20.0 °C	28000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 28000000.0 S/m	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Rod
spezifischer Widerstand		4e-08 - 4.35e-08 Ω·m Show Material materials with spezifischer Widerstand of 4e-08 - 4.35e-08 Ω·m	O	EN 573-3, EN 1396, EN 485, EN 546

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.1 % Show Material materials with Chrom of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485, EN 546	Sheet, Flat, Rod
Eisen	0.7 % Show Material materials with Eisen of 0.7 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Rod
	0.70 % Show Material materials with Eisen of 0.70 %	O	EN 573-3, EN 1396, EN 485, EN 546
Kupfer	0.3 % Show Material materials with Kupfer of 0.3 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485, EN 546	Sheet, Flat, Rod
Magnesium	0.2 - 0.6 % Show Material materials with Magnesium of 0.2 - 0.6 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485, EN 546	Sheet, Flat, Rod
Mangan	1.0 - 1.5 % Show Material materials with Mangan of 1.0 - 1.5 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485, EN 546	Sheet, Flat, Rod
Silizium	0.6 % Show Material materials with Silizium of 0.6 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485, EN 546	Sheet, Flat, Rod
Titan	0.1 % Show Material materials with Titan of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485, EN 546	Sheet, Flat, Rod
Zink	0.25 % Show Material materials with Zink of 0.25 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 1396, EN 485, EN 546	Sheet, Flat, Rod

Technological properties

Property

Anodizing

decorative: sufficient, Protective: very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)