EN 573-3 Grade 3.3316 O

Want to keep this datasheet? Save it now in your required format

Description

The alloys are characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. From the AlMg alloys the mark AlMg1,5 has to exhibit only relatively small mechanical properties. Standardised semi-finished material only for sheet metal and strips with thickness: > 0.35 mm in accordance to DIN 1745. Application: The main application lies in the building industry. In the building industry for lamella net curtains, rolling shutter, roll gates, in food industry (including table-ware) and for transport containers.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte		2.68 g/cm³ Show Material materials with Dichte of 2.68 g/cm³	O	EN 573-3, EN 485
		2.69 g/cm³ Show Material materials with Dichte of 2.69 g/cm³	O	EN 573-3, EN 485
	20.0 °C	2.69 g/cm³ Show Material materials with Dichte of 2.69 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Biegewinkel 180°		0.5 °/t Show Material materials with Biegewinkel 180° of 0.5 °/t	O	EN 573-3, EN 485
Biegewinkel 90°		1.0 °/t Show Material materials with Biegewinkel 90° of 1.0 °/t	O	EN 573-3, EN 485
		2.0 °/t Show Material materials with Biegewinkel 90° of 2.0 °/t	O	EN 573-3, EN 485
Dehnung		16.0 % Show Material materials with Dehnung of 16.0 %	O	EN 573-3, EN 485		A50
		17.0 % Show Material materials with Dehnung of 17.0 %	O	EN 573-3, EN 485		A50
		19.0 % Show Material materials with Dehnung of 19.0 %	O	EN 573-3, EN 485		A50
		20.0 % Show Material materials with Dehnung of 20.0 %	O	EN 573-3, EN 485		A50
		20.0 % Show Material materials with Dehnung of 20.0 %	O	EN 573-3, EN 485		A100
		21.0 % Show Material materials with Dehnung of 21.0 %	O	EN 573-3, EN 485		A50
	20.0 °C	20.0 % Show Material materials with Dehnung of 20.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip	A10
	20.0 °C	23.0 % Show Material materials with Dehnung of 23.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Elastizitätsmodul		69.0 GPa Show Material materials with Elastizitätsmodul of 69.0 GPa	O	EN 573-3, EN 485
		70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	O	EN 573-3, EN 485
	20.0 °C	70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Härte, Brinell		36.0 [-] Show Material materials with Härte, Brinell of 36.0 [-]	O	EN 573-3, EN 485
	20.0 °C	37.0 [-] Show Material materials with Härte, Brinell of 37.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Schubmodule	20.0 °C	26.5 Show Material materials with Schubmodule of 26.5	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Zugfestigkeit	20.0 °C	130.0 - 170.0 MPa Show Material materials with Zugfestigkeit of 130.0 - 170.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Sheet, Strip

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung	20 °C	2.38e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.38e-05 1/K	O	EN 573-3, EN 485
	100 °C	2.38e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.38e-05 1/K	O	EN 573-3, EN 485
Max. Betriebstemperatur		150.0 °C Show Material materials with Max. Betriebstemperatur of 150.0 °C				Typical for Wrought 5000 Series Aluminium
Schmelzpunkt		620.0 - 650.0 °C Show Material materials with Schmelzpunkt of 620.0 - 650.0 °C	O	EN 573-3, EN 485
		625.0 - 650.0 °C Show Material materials with Schmelzpunkt of 625.0 - 650.0 °C	O	EN 573-3, EN 485
Spezifische Wärmekapazität		879.0 - 963.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 879.0 - 963.0 J/(kg·K)				Typical for Wrought 5000 Series Aluminium
Wärmeleitfähigkeit		170.0 - 190.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 170.0 - 190.0 W/(m·K)	O	EN 573-3, EN 485
		193 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 193 W/(m·K)	O	EN 573-3, EN 485
	20.0 °C	160.0 - 200.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 160.0 - 200.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit		23000000.0 - 26000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 23000000.0 - 26000000.0 S/m	O	EN 573-3, EN 485
		29000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 29000000.0 S/m	O	EN 573-3, EN 485
	20.0 °C	28000000.0 - 30000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 28000000.0 - 30000000.0 S/m	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
spezifischer Widerstand		3.45e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.45e-08 Ω·m	O	EN 573-3, EN 485
		3.85e-08 - 4.35e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.85e-08 - 4.35e-08 Ω·m	O	EN 573-3, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.1 % Show Material materials with Chrom of 0.1 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Sheet, Strip
Eisen	0.45 % Show Material materials with Eisen of 0.45 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	0.45 % Show Material materials with Eisen of 0.45 %	O	EN 573-3, EN 485
Kupfer	0.05 % Show Material materials with Kupfer of 0.05 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Sheet, Strip
Magnesium	1.1 - 1.7 % Show Material materials with Magnesium of 1.1 - 1.7 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Sheet, Strip
Mangan	0.15 % Show Material materials with Mangan of 0.15 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Sheet, Strip
Silizium	0.4 % Show Material materials with Silizium of 0.4 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Sheet, Strip
Zink	0.2 % Show Material materials with Zink of 0.2 %	O	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Sheet, Strip

Technological properties

Property

Workability

Good workability.