Allgemein
Property | Value | Condition | Related Standards |
---|---|---|---|
Dichte | 2.7 g/cm³ Show Material materials with Dichte of 2.7 g/cm³ | H19 | EN 573-3, EN 683 |
Mechanisch
Property | Value | Condition | Related Standards | Comment |
---|---|---|---|---|
Elastizitätsmodul | 69.5 GPa Show Material materials with Elastizitätsmodul of 69.5 GPa | H19 | EN 573-3, EN 683 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 6000 Series Aluminium | ||
Poissonzahl | 0.33 [-] Show Material materials with Poissonzahl of 0.33 [-] | Typical for Wrought 6000 Series Aluminium | ||
Schubmodule | 26.1 GPa Show Material materials with Schubmodule of 26.1 GPa | H19 | EN 573-3, EN 683 | |
Zugfestigkeit | 200.0 MPa Show Material materials with Zugfestigkeit of 200.0 MPa | H19 | EN 573-3, EN 683 |
Thermisch
Property | Temperature | Value | Condition | Related Standards |
---|---|---|---|---|
Koeffizient der thermischen Ausdehnung | -50 °C | 2.18e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.18e-05 1/K | H19 | EN 573-3, EN 683 |
20 °C | 2.18e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.18e-05 1/K | H19 | EN 573-3, EN 683 | |
20 °C | 2.3399999999999996e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3399999999999996e-05 1/K | H19 | EN 573-3, EN 683 | |
20 °C | 2.45e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.45e-05 1/K | H19 | EN 573-3, EN 683 | |
20 °C | 2.56e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.56e-05 1/K | H19 | EN 573-3, EN 683 | |
100 °C | 2.3399999999999996e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3399999999999996e-05 1/K | H19 | EN 573-3, EN 683 | |
200 °C | 2.45e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.45e-05 1/K | H19 | EN 573-3, EN 683 | |
300 °C | 2.56e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.56e-05 1/K | H19 | EN 573-3, EN 683 | |
Schmelzpunkt | 585.0 - 650.0 °C Show Material materials with Schmelzpunkt of 585.0 - 650.0 °C | H19 | EN 573-3, EN 683 | |
Spezifische Wärmekapazität | 898.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 898.0 J/(kg·K) | H19 | EN 573-3, EN 683 | |
Wärmeleitfähigkeit | 200.0 - 220.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 200.0 - 220.0 W/(m·K) | H19 | EN 573-3, EN 683 |
Elektrisch
Property | Value | Condition | Related Standards |
---|---|---|---|
Elektrische Leitfähigkeit | 34000000.0 - 38000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 34000000.0 - 38000000.0 S/m | H19 | EN 573-3, EN 683 |
spezifischer Widerstand | 2.63e-08 - 2.94e-08 Ω·m Show Material materials with spezifischer Widerstand of 2.63e-08 - 2.94e-08 Ω·m | H19 | EN 573-3, EN 683 |
Chemical properties
Property | Value | Condition | Related Standards |
---|---|---|---|
Chrom | 0.05 % Show Material materials with Chrom of 0.05 % | H19 | EN 573-3, EN 683 |
Eisen | 0.1 - 0.3 % Show Material materials with Eisen of 0.1 - 0.3 % | H19 | EN 573-3, EN 683 |
Kupfer | 0.1 % Show Material materials with Kupfer of 0.1 % | H19 | EN 573-3, EN 683 |
Magnesium | 0.35 - 0.6 % Show Material materials with Magnesium of 0.35 - 0.6 % | H19 | EN 573-3, EN 683 |
Mangan | 0.1 % Show Material materials with Mangan of 0.1 % | H19 | EN 573-3, EN 683 |
Silizium | 0.3 - 0.6 % Show Material materials with Silizium of 0.3 - 0.6 % | H19 | EN 573-3, EN 683 |
Titan | 0.1 % Show Material materials with Titan of 0.1 % | H19 | EN 573-3, EN 683 |
Zink | 0.15 % Show Material materials with Zink of 0.15 % | H19 | EN 573-3, EN 683 |
Technological properties
Property | ||
---|---|---|
Anodizing | decorative: EQ: sehr gut, Protective: very good | |
Brazing | hard brazing (with flux/ without flux): very good / good, friction soldering: very good, soft brazing with flux: good | |
Corrosion properties | Seawater: good, weathering: very good | |
Workability | Bending / Spinning (cold): acceptable (T3, T4) / -, Impact extrusion (cold): good (O), Deep drawing / upsetting (Condition) - / good (O) |