Allgemein
Property | Value | Condition | Related Standards |
---|---|---|---|
Dichte | 2.7 g/cm³ Show Material materials with Dichte of 2.7 g/cm³ | H24 | EN 573-3, EN 485 |
Mechanisch
Property | Value | Condition | Related Standards | Comment |
---|---|---|---|---|
Biegewinkel 180° | 0.5 °/t Show Material materials with Biegewinkel 180° of 0.5 °/t | H24 | EN 573-3, EN 485 | |
1.0 °/t Show Material materials with Biegewinkel 180° of 1.0 °/t | H24 | EN 573-3, EN 485 | ||
Biegewinkel 90° | 0.5 °/t Show Material materials with Biegewinkel 90° of 0.5 °/t | H24 | EN 573-3, EN 485 | |
1.0 °/t Show Material materials with Biegewinkel 90° of 1.0 °/t | H24 | EN 573-3, EN 485 | ||
1.5 °/t Show Material materials with Biegewinkel 90° of 1.5 °/t | H24 | EN 573-3, EN 485 | ||
2.5 °/t Show Material materials with Biegewinkel 90° of 2.5 °/t | H24 | EN 573-3, EN 485 | ||
Elastizitätsmodul | 70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa | H24 | EN 573-3, EN 485 | |
Härte, Brinell | 31.0 [-] Show Material materials with Härte, Brinell of 31.0 [-] | H24 | EN 573-3, EN 485 | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 1000 Series Aluminium | ||
Poissonzahl | 0.33 [-] Show Material materials with Poissonzahl of 0.33 [-] | Typical for Wrought 1000 Series Aluminium | ||
Schubmodule | 25.9 GPa Show Material materials with Schubmodule of 25.9 GPa | Typical for Wrought 1000 Series Aluminium | ||
Zugfestigkeit | 100.0 - 140.0 MPa Show Material materials with Zugfestigkeit of 100.0 - 140.0 MPa | H24 | EN 573-3, EN 485 |
Thermisch
Property | Temperature | Value | Condition | Related Standards | Comment |
---|---|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 20 °C | 2.35e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.35e-05 1/K | H24 | EN 573-3, EN 485 | |
100 °C | 2.35e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.35e-05 1/K | H24 | EN 573-3, EN 485 | ||
Schmelzpunkt | 659.0 °C Show Material materials with Schmelzpunkt of 659.0 °C | H24 | EN 573-3, EN 485 | ||
Spezifische Wärmekapazität | 900.0 - 963.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 900.0 - 963.0 J/(kg·K) | Typical for Wrought 1000 Series Aluminium | |||
Wärmeleitfähigkeit | 225 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 225 W/(m·K) | H24 | EN 573-3, EN 485 |
Elektrisch
Property | Value | Condition | Related Standards |
---|---|---|---|
Elektrische Leitfähigkeit | 34500000.0 - 35000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 34500000.0 - 35000000.0 S/m | H24 | EN 573-3, EN 485 |
spezifischer Widerstand | 2.86e-08 - 2.9e-08 Ω·m Show Material materials with spezifischer Widerstand of 2.86e-08 - 2.9e-08 Ω·m | H24 | EN 573-3, EN 485 |
Chemical properties
Property | Value | Condition | Related Standards |
---|---|---|---|
Aluminium | 99.8 % Show Material materials with Aluminium of 99.8 % | H24 | EN 573-3, EN 485 |
Eisen | 0.15 % Show Material materials with Eisen of 0.15 % | H24 | EN 573-3, EN 485 |
Gallium | 0.03 % Show Material materials with Gallium of 0.03 % | H24 | EN 573-3, EN 485 |
Kupfer | 0.03 % Show Material materials with Kupfer of 0.03 % | H24 | EN 573-3, EN 485 |
Magnesium | 0.02 % Show Material materials with Magnesium of 0.02 % | H24 | EN 573-3, EN 485 |
Mangan | 0.02 % Show Material materials with Mangan of 0.02 % | H24 | EN 573-3, EN 485 |
Silizium | 0.15 % Show Material materials with Silizium of 0.15 % | H24 | EN 573-3, EN 485 |
Titan | 0.02 % Show Material materials with Titan of 0.02 % | H24 | EN 573-3, EN 485 |
Zink | 0.06 % Show Material materials with Zink of 0.06 % | H24 | EN 573-3, EN 485 |
Technological properties
Property | ||
---|---|---|
Anodizing | decorative: very good, Protective: very good | |
Brazing | hard brazing (with flux/ without flux): very good / very good, friction soldering: very good, soft brazing with flux: very good | |
Workability | Bending / Spinning (cold): very good / very good, Impact extrusion (cold): very good, Deep drawing / upsetting (Condition) very good (H14) / very good (H12) |