Eigenschaften
Allgemein
| Property | Temperature | Value |
|---|---|---|
Dichte | 23.0 °C | 8.9 g/cm³ Show Material materials with Dichte of 8.9 g/cm³ |
Mechanisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dehnung | 23.0 °C | 35 - 42 % Show Material materials with Dehnung of 35 - 42 % | |
Dehnung A50 | 23.0 °C | 25 % Show Material materials with Dehnung A50 of 25 % | |
Elastizitätsmodul | 23.0 °C | 130 GPa Show Material materials with Elastizitätsmodul of 130 GPa | |
Elongation A100 | 23.0 °C | 25 % Show Material materials with Elongation A100 of 25 % | |
Poissonzahl | 23.0 °C | 0.34 [-] Show Material materials with Poissonzahl of 0.34 [-] | Typical for Wrought Copper Pure / Low Alloyed Copper |
Schubmodule | 23.0 °C | 48 GPa Show Material materials with Schubmodule of 48 GPa | Typical for Wrought Copper Pure / Low Alloyed Copper |
Streckgrenze Rp 0,2 | 23.0 °C | 100 - 120 MPa Show Material materials with Streckgrenze Rp 0,2 of 100 - 120 MPa | |
Zugfestigkeit | 23.0 °C | 200 - 250 MPa Show Material materials with Zugfestigkeit of 200 - 250 MPa |
Thermisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 20.0 °C | 1.73E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.73E-5 1/K | |
100.0 °C | 1.73E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.73E-5 1/K | ||
Schmelzpunkt | 1083 °C Show Material materials with Schmelzpunkt of 1083 °C | ||
Spezifische Wärmekapazität | 23.0 °C | 377 - 420 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 377 - 420 J/(kg·K) | Typical for Wrought Copper Pure / Low Alloyed Copper |
Wärmeleitfähigkeit | 23.0 °C | 393 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 393 W/(m·K) | |
Elektrisch
| Property | Temperature | Value |
|---|---|---|
Elektrische Leitfähigkeit | 23.0 °C | 5.80E+7 S/m Show Material materials with Elektrische Leitfähigkeit of 5.80E+7 S/m |
spezifischer Widerstand | 23.0 °C | 1.72E-8 Ω·m Show Material materials with spezifischer Widerstand of 1.72E-8 Ω·m |
Chemical properties
Technological properties
| Property | ||
|---|---|---|
| Brazing | hard brazing : good, soft brazing: very good | |
| Workability | Cold forming degree between anneals: max. 90 %, general (condition): very good | |