Allgemein
Property | Temperature | Value |
---|---|---|
Dichte | 23.0 °C | 8.9 g/cm³ Show Material materials with Dichte of 8.9 g/cm³ |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Dehnung | 23.0 °C | 40 % Show Material materials with Dehnung of 40 % | |
Elastizitätsmodul | 23.0 °C | 132 GPa Show Material materials with Elastizitätsmodul of 132 GPa | |
Härte, Vickers | 23.0 °C | 40 - 70 [-] Show Material materials with Härte, Vickers of 40 - 70 [-] | |
Poissonzahl | 23.0 °C | 0.34 [-] Show Material materials with Poissonzahl of 0.34 [-] | Typical for Wrought Copper Pure / Low Alloyed Copper |
Schubmodule | 23.0 °C | 48 GPa Show Material materials with Schubmodule of 48 GPa | Typical for Wrought Copper Pure / Low Alloyed Copper |
Zugfestigkeit | 23.0 °C | 220 MPa Show Material materials with Zugfestigkeit of 220 MPa |
Thermisch
Property | Temperature | Value | Comment |
---|---|---|---|
Koeffizient der thermischen Ausdehnung | 20.0 °C | 1.68E-5 - 1.77E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.68E-5 - 1.77E-5 1/K | |
100.0 °C | 1.68E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.68E-5 1/K | ||
200.0 °C | 1.73E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.73E-5 1/K | ||
300.0 °C | 1.77E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.77E-5 1/K | ||
Schmelzpunkt | 1083 °C Show Material materials with Schmelzpunkt of 1083 °C | ||
Spezifische Wärmekapazität | 23.0 °C | 377 - 420 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 377 - 420 J/(kg·K) | Typical for Wrought Copper Pure / Low Alloyed Copper |
Wärmeleitfähigkeit | 23.0 °C | 293 - 364 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 293 - 364 W/(m·K) |
Elektrisch
Property | Temperature | Value |
---|---|---|
Elektrische Leitfähigkeit | 23.0 °C | 4.10E+7 - 5.20E+7 S/m Show Material materials with Elektrische Leitfähigkeit of 4.10E+7 - 5.20E+7 S/m |
spezifischer Widerstand | 23.0 °C | 1.92E-8 - 2.44E-8 Ω·m Show Material materials with spezifischer Widerstand of 1.92E-8 - 2.44E-8 Ω·m |
Chemical properties
Property | Value |
---|---|
Andere | total 0.03. excluded Ag, Ni, P |
Kupfer | 99.9 % Show Material materials with Kupfer of 99.9 % |
Phosphor | 0.02 - 0.04 % Show Material materials with Phosphor of 0.02 - 0.04 % |
Technological properties
Property | ||
---|---|---|
Brazing | hard brazing : very good, soft brazing: very good | |
Workability | Cold forming degree between anneals: max. 95 %, general (condition): very good |