Eigenschaften
Allgemein
| Property | Temperature | Value |
|---|---|---|
Dichte | 20.0 °C | 8.8 g/cm³ Show Material materials with Dichte of 8.8 g/cm³ |
Abmessung
| Property | Value |
|---|---|
Dimensions | Dicke |
Mechanisch
| Property | Temperature | Value |
|---|---|---|
Biegewinkel 90° | 20.0 °C | 0 °/t Show Material materials with Biegewinkel 90° of 0 °/t |
Dehnung A50 | 20.0 °C | 8 - 10 % Show Material materials with Dehnung A50 of 8 - 10 % |
Elastizitätsmodul | 20.0 °C | 125 GPa Show Material materials with Elastizitätsmodul of 125 GPa |
Härte, Vickers | 20.0 °C | 100 - 120 [-] Show Material materials with Härte, Vickers of 100 - 120 [-] |
Streckgrenze Rp 0,2 | 20.0 °C | 240 MPa Show Material materials with Streckgrenze Rp 0,2 of 240 MPa |
Zugfestigkeit | 20.0 °C | 340 - 390 MPa Show Material materials with Zugfestigkeit of 340 - 390 MPa |
Thermisch
| Property | Temperature | Value |
|---|---|---|
Koeffizient der thermischen Ausdehnung | 20.0 °C | 1.63E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.63E-5 1/K |
100.0 °C | 1.63E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.63E-5 1/K | |
Schmelzpunkt | 1084 - 1089 °C Show Material materials with Schmelzpunkt of 1084 - 1089 °C | |
Wärmeleitfähigkeit | 20.0 °C | 200 - 260 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 200 - 260 W/(m·K) |
Elektrisch
| Property | Temperature | Value |
|---|---|---|
Elektrische Leitfähigkeit | 20.0 °C | 1.70E+7 - 3.80E+7 S/m Show Material materials with Elektrische Leitfähigkeit of 1.70E+7 - 3.80E+7 S/m |
spezifischer Widerstand | 20.0 °C | 2.63E-8 - 5.88E-8 Ω·m Show Material materials with spezifischer Widerstand of 2.63E-8 - 5.88E-8 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Andere | Rest Cu, total 0.2 |
Blei | 0.03 % Show Material materials with Blei of 0.03 % |
Eisen | 2.1 - 2.6 % Show Material materials with Eisen of 2.1 - 2.6 % |
Phosphor | 0.02 - 0.15 % Show Material materials with Phosphor of 0.02 - 0.15 % |
Zink | 0.05 - 0.2 % Show Material materials with Zink of 0.05 - 0.2 % |
Technological properties
| Property | ||
|---|---|---|
| Brazing | hard brazing : very good, soft brazing: very good | |
| Workability | Cold forming degree between anneals: max. 90 %, general (condition): good | |