Eigenschaften
Allgemein
| Property | Temperature | Value |
|---|---|---|
Dichte | 20.0 °C | 8.4 g/cm³ Show Material materials with Dichte of 8.4 g/cm³ |
Abmessung
| Property | Value |
|---|---|
Dimensions | Dicke |
Mechanisch
| Property | Temperature | Value |
|---|---|---|
Dehnung | 20.0 °C | 48 % Show Material materials with Dehnung of 48 % |
Dehnung A50 | 20.0 °C | 38 % Show Material materials with Dehnung A50 of 38 % |
Elastizitätsmodul | 20.0 °C | 110 GPa Show Material materials with Elastizitätsmodul of 110 GPa |
Härte, Vickers | 20.0 °C | 55 - 95 [-] Show Material materials with Härte, Vickers of 55 - 95 [-] |
Streckgrenze Rp 0,2 | 20.0 °C | 180 MPa Show Material materials with Streckgrenze Rp 0,2 of 180 MPa |
Zugfestigkeit | 20.0 °C | 300 - 370 MPa Show Material materials with Zugfestigkeit of 300 - 370 MPa |
Thermisch
| Property | Temperature | Value |
|---|---|---|
Koeffizient der thermischen Ausdehnung | 20.0 °C | 2.02E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.02E-5 1/K |
100.0 °C | 2.02E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.02E-5 1/K | |
Schmelzpunkt | 902 - 920 °C Show Material materials with Schmelzpunkt of 902 - 920 °C | |
Wärmeleitfähigkeit | 20.0 °C | 121 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 121 W/(m·K) |
Elektrisch
| Property | Temperature | Value |
|---|---|---|
Elektrische Leitfähigkeit | 20.0 °C | 1.50E+7 S/m Show Material materials with Elektrische Leitfähigkeit of 1.50E+7 S/m |
spezifischer Widerstand | 20.0 °C | 6.67E-8 Ω·m Show Material materials with spezifischer Widerstand of 6.67E-8 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Aluminium | 0.02 % Show Material materials with Aluminium of 0.02 % |
Andere | Rest Zn, total 0.1 |
Blei | 0.05 % Show Material materials with Blei of 0.05 % |
Eisen | 0.05 % Show Material materials with Eisen of 0.05 % |
Kupfer | 63.5 - 65.5 % Show Material materials with Kupfer of 63.5 - 65.5 % |
Nickel | 0.3 % Show Material materials with Nickel of 0.3 % |
Zinn | 0.1 % Show Material materials with Zinn of 0.1 % |
Technological properties
| Property | ||
|---|---|---|
| Brazing | hard brazing : very good, soft brazing: very good | |
| Workability | Cold forming degree between anneals: max. 65 %, general (condition): very good | |