Eigenschaften
Allgemein
| Property | Value | Comment |
|---|---|---|
Carbon equivalent (CEV) | 0.15 [-] Show Supplier Material materials with Carbon equivalent (CEV) of 0.15 [-] | max. |
Abmessung
| Property | Value |
|---|---|
Dimensions | Please feel free to check the figure on the right side of the material page for more details. |
Mechanisch
| Property | Value | Comment |
|---|---|---|
Dehnung | 28 % Show Supplier Material materials with Dehnung of 28 % | min. | for thickness 1.5-2 mm | Transverse, A80 |
29 % Show Supplier Material materials with Dehnung of 29 % | min. | for thickness 2-3 mm | Transverse, A80 | |
33 % Show Supplier Material materials with Dehnung of 33 % | min. A5.65√So | for thickness 3-12 mm | Transverse | |
Streckgrenze | 200 - 330 MPa Show Supplier Material materials with Streckgrenze of 200 - 330 MPa | for thickness 1.5-2 mm | Transverse |
200 - 310 MPa Show Supplier Material materials with Streckgrenze of 200 - 310 MPa | for thickness 2-12 mm | Transverse | |
Zugfestigkeit | 300 - 400 MPa Show Supplier Material materials with Zugfestigkeit of 300 - 400 MPa | for thickness 1.5-12 mm | Transverse |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 0.02 % Show Supplier Material materials with Aluminium of 0.02 % | max. |
Kohlenstoff | 0.08 % Show Supplier Material materials with Kohlenstoff of 0.08 % | max. |
Mangan | 0.4 % Show Supplier Material materials with Mangan of 0.4 % | max. |
Phosphor | 0.025 % Show Supplier Material materials with Phosphor of 0.025 % | max. |
Schwefel | 0.025 % Show Supplier Material materials with Schwefel of 0.025 % | max. |
Silizium | 0.03 % Show Supplier Material materials with Silizium of 0.03 % | max. |
Technological properties
| Property | ||
|---|---|---|
| Application areas | This is widely used for bending and drawing applications in general industry, building, the automotive industry and related sectors (e.g. oil sumps for industrial vehicles etc). ArcelorMittal's steels for cold forming and deep drawing applications display good or even excellent performance in all types of deep drawing processes, enabling the production of complex parts. Uncoated hot rolled steels for bending and deep drawing applications are suitable under certain conditions for food contact, as specified in the Regulation (EC) No. 1935/2004 and French standard NF A 36-714. Please contact us for further information on this subject. | |
| Coating | Galvanisation: Class 1 | |
| Other | ArcelorMittal provides guarantees for thicknesses greater than 11 mm. | |
| Welding | The weldability (spot and arc welding) of ArcelorMittal's hot rolled steels for cold forming and deep drawing is equivalent to that of cold rolled steels of corresponding grades. | |