DC01BS AM FCE

Want to keep this datasheet? Save it now in your required format

Description

DC01BS AM FCE is a cold rolled steel that has been oxidised by annealing in a special installation to produce a very thin magnetite layer (Fe304) on the surface (less than 1 µm thick). It provides protection against corrosion for parts whose surface cannot be protected by normal painting or any metallic coating processes. The magnetite layer can withstand moderate bending and drawing operations. The sheet surface is very clean and retains its attractive appearance during storage.

Related Standards

Equivalent Materials

EN DC01

Diese Materialdaten wurden von ArcelorMittal zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Abmessung

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mechanisch

Property	Value	Comment
Dehnung	26 % Show Supplier Material materials with Dehnung of 26 %	min. \| for thickness 0.5-0.7 mm \| Transverse \| A80
	28 % Show Supplier Material materials with Dehnung of 28 %	min. \| for thickness 0.7-2 mm \| Transverse \| A80
Streckgrenze	140 - 300 MPa Show Supplier Material materials with Streckgrenze of 140 - 300 MPa	for thickness 0.5-0.7 mm \| Transverse
	140 - 280 MPa Show Supplier Material materials with Streckgrenze of 140 - 280 MPa	for thickness 0.7-2 mm \| Transverse
Zugfestigkeit	270 - 410 MPa Show Supplier Material materials with Zugfestigkeit of 270 - 410 MPa	for thickness 0.5-2 mm \| Transverse

Chemical properties

Property	Value	Comment
Kohlenstoff	0.12 % Show Supplier Material materials with Kohlenstoff of 0.12 %	max.
Mangan	0.6 % Show Supplier Material materials with Mangan of 0.6 %	max.
Phosphor	0.045 % Show Supplier Material materials with Phosphor of 0.045 %	max.
Schwefel	0.035 % Show Supplier Material materials with Schwefel of 0.035 %	max.

Technological properties

Property
Application areas	The main areas of use are: Stove pipes Food contact other than packaging Cake and biscuit moulds Baking trays Lining of industrial bread ovens Blued steels are suitable for food contact, under certain conditions laid down in European Regulation (EC) No. 1935/2004 and French standard NF A 36-714. Please contact us for further information on this subject.
Coating	DC01BS AM FCE can be supplied with or without oil film.
Corrosion properties	Corrosion resistance is better than for uncoated cold rolled steels, but is nevertheless limited, particularly in humid atmospheres (salt spray test).
Processing methods	The processing conditions for DC01BS AM FCE is similar to those for cold forming. However, in the case of difficult drawing operations, the oxide layer may crack and lose its continuity.