DC07EK AM FCE

Want to keep this datasheet? Save it now in your required format

Description

This grade is suitable for light and deep drawing and two-side enamelling adapted to the client's process (wet or dry enamelling). It also offers excellent resistance to "fish scale" defects.

After drawing, cold rolled steels for conventional enamelling are used for:

Ground-coat enamelling one coat / one fire

Conventional enamelling two coats / two fires

Grade DC07EK AM FCE is intended for very deep drawing applications.

Diese Materialdaten wurden von ArcelorMittal zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Abmessung

Property	Value
Dimensions	Please feel free to check the figure on the right side of the material page for more details.

Mechanisch

Property	Value	Comment
Dehnung	40 % Show Supplier Material materials with Dehnung of 40 %	min. \| for thickness 0.5-3 mm \| Transverse \| A80
Plastic strain ratio	1.5 [-] Show Supplier Material materials with Plastic strain ratio of 1.5 [-]	min. \| 90ᵒ Transverse \| for thickness 2-3 mm
	1.7 [-] Show Supplier Material materials with Plastic strain ratio of 1.7 [-]	min. \| 90ᵒ Transverse \| for thickness 0.5-2 mm
Strain hardening exponent	0.19 [-] Show Supplier Material materials with Strain hardening exponent of 0.19 [-]	min. \| 90ᵒ Transverse \| for thickness 0.5-3 mm
Streckgrenze	90 - 160 MPa Show Supplier Material materials with Streckgrenze of 90 - 160 MPa	for thickness 0.5-3 mm \| Transverse
Zugfestigkeit	270 - 350 MPa Show Supplier Material materials with Zugfestigkeit of 270 - 350 MPa	for thickness 0.5-3 mm \| Transverse

Chemical properties

Property	Value	Comment
Kohlenstoff	0.02 % Show Supplier Material materials with Kohlenstoff of 0.02 %	max.
Mangan	0.5 % Show Supplier Material materials with Mangan of 0.5 %	max.
Phosphor	0.03 % Show Supplier Material materials with Phosphor of 0.03 %	max.
Schwefel	0.05 % Show Supplier Material materials with Schwefel of 0.05 %	max.
Titan	0.2 % Show Supplier Material materials with Titan of 0.2 %	max.

Technological properties

Property
Application areas	This steel has many applications: Domestic appliances (cooking, laundry) Sanitary ware (bathtubs, shower trays, sinks) Architectural panels (building interiors and exteriors, transport and infrastructure), signage Industry
Coating	Enamelling Surface preparation: If an additive-free ground-coat enamel is used (e.g. without adhesion oxides), light pickling is recommended after meticulous degreasing (targeting an iron loss of 5 g/m2 per side), especially DC07EK AM FCE, which have a lower surface reactivity. In this case, surface reactivity can be improved by a nickel flash Pickling can be avoided by using a ground-coat enamel with the addition of adhesion oxides (nickel or cobalt oxides) Application of the enamel and firing: DC07EK AM FCE is compatible with all the common enamelling processes: wet spraying, wet or dry electrostatic deposition This grade has a very good level of internal purity (few inclusions) and consistency. The risk of the appearance of defects such as black dots, lines or bubbles is minimal. A good resistance to "fish scale" defects is obtained through tight control of manufacturing conditions Finally, firing is performed at a temperature of about 830°C.
Joining	It can be welded without any difficulty, whatever the welding process may be. Other joining processes (clinching, crimping) may also be used.
Processing methods	DC07EK AM FCE, interstitial free steel (IFS) with low carbon content and excellent rheological and mechanical properties, can be used for forming very complex parts.

DC07EK AM FCE

Description

Ashby charts

Materialien von diesem Anbieter

Eigenschaften