M470YS-50A AM FCE

Alternative und Handelsbezeichungen
HLE50

Want to keep this datasheet? Save it now in your required format

Description

Non-oriented fully processed high strength grade has not only guaranteed magnetic properties but also guaranteed mechanical properties. Typical for this grade is higher strength values compared with the standard grades, both at room temperature and at higher temperature operating conditions. Full magnetic characterisation curves at different frequencies are available on request.

This high strength grade withstands stronger mechanical forces than the standard grades. It is therefore an excellent compromise when a combination of high mechanical strength and low magnetic losses is required.

Diese Materialdaten wurden von ArcelorMittal zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Allgemein

Property	Value
Dichte	7.6 g/cm³ Show Supplier Material materials with Dichte of 7.6 g/cm³

Mechanisch

Property	Value	Comment
Dehnung	15 % Show Supplier Material materials with Dehnung of 15 %	min. \| Guaranteed \| Transverse \| A80
	20 - 30 % Show Supplier Material materials with Dehnung of 20 - 30 %	Typical values \| Transverse \| A80
Härte, Vickers	205 - 235 [-] Show Supplier Material materials with Härte, Vickers of 205 - 235 [-]	Typical values
Streckgrenze	470 MPa Show Supplier Material materials with Streckgrenze of 470 MPa	min. \| Guaranteed \| Transverse
	485 - 525 MPa Show Supplier Material materials with Streckgrenze of 485 - 525 MPa	Typical values \| Transverse
Yield to strength ratio	0.78 - 0.83 [-] Show Supplier Material materials with Yield to strength ratio of 0.78 - 0.83 [-]	Typical values
Zugfestigkeit	580 MPa Show Supplier Material materials with Zugfestigkeit of 580 MPa	min. \| Guaranteed \| Transverse
	605 - 645 MPa Show Supplier Material materials with Zugfestigkeit of 605 - 645 MPa	Typical values \| Transverse

Magnetisch

Property	Value	Frequency	Comment
Garantierte Polarisierung	1.6 [-] Show Supplier Material materials with Garantierte Polarisierung of 1.6 [-]		min. \| at 5000 A/m
Garantierter Kernverlust	4.7 W/kg Show Supplier Material materials with Garantierter Kernverlust of 4.7 W/kg	50Hz	max. at 1.5 T

Technological properties

Property

Application areas

High strength values, combined with low losses and good permeability, make this grade particularly suitable for high-speed rotating machines.

Coating

This standard grade is available non-insulated or varnished with any of the coating types described in the following link https://industry.arcelormittal.com/catalogue/D28/EN .

Other

The above properties are obtained without heat treatment after stamping. The material as supplied possesses all the required magnetic properties.

Dimensions:

	Before side trimming		Side trimmed		Slit coils		Sheet length 400 to 2500 mm
	Min width	Max width	Min width	Max width	Min width	Max width	Min width	Max width
M 470YS-50 A AM FCE	1030	1230	600	1200	250	600	400	1100
M 470YS-50 A AM FCE	1030	1230	600	1200	250	600	400	1100

M470YS-50A AM FCE

Description

Ashby charts

Materialien von diesem Anbieter

Eigenschaften