G-3938 (LLDPE)

Alternative und Handelsbezeichungen
G-3938 (LLDPE)

Want to keep this datasheet? Save it now in your required format

Description

GREENETHENE G-3938 is a Low Density Linear Polyethylene Resin (LLDPE) in powder form, additivated with antioxidants and UV stabilizers. It is suitable for Rotational Molding applications. Items produced by GREENETHENE G-3938 have a very good balance between mechanical properties and ESCR resistance. G-3938 produced in: natural, black also upon request in terracotta, fire red, yellow & blue. GREENETHENE G-3938 meets the requirement stipulated in standard IS:10141:2001 on “Specification for Polyethylene for safe use in contact with foodstuff, pharmaceuticals & Drinking Water”. It also conforms to IS 12701:1996 –“Specification For Rotational Moulded Polyethylene Water Storage Tanks.”.

Diese Materialdaten wurden von GreenAge Industries zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	0.94 g/cm³ Show Supplier Material materials with Dichte of 0.94 g/cm³	ASTM D1505

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	23.0 °C	0.23 - 0.88 GPa Show Supplier Material materials with Biegemodul of 0.23 - 0.88 GPa	ASTM D790
Dehnung	23.0 °C	110 - 350 % Show Supplier Material materials with Dehnung of 110 - 350 %	ASTM D638
Härte, Shore D	23.0 °C	58 [-] Show Supplier Material materials with Härte, Shore D of 58 [-]	ASTM D2240
Impact strength, Izod notched, ASTM	23.0 °C	220 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 220 J/m	ASTM D256
Streckgrenze	23.0 °C	20.5 - 21 MPa Show Supplier Material materials with Streckgrenze of 20.5 - 21 MPa	ASTM D638
Zugfestigkeit	23.0 °C	11.75 MPa Show Supplier Material materials with Zugfestigkeit of 11.75 MPa	ASTM D638

Thermisch

Property	Value	Comment
Vicat-Erweichungstemperatur	118 °C Show Supplier Material materials with Vicat-Erweichungstemperatur of 118 °C	ASTM D1525

Rheological Properties

Property	Value	Comment
Schmelzmassenflussrate	3.8 g/10min Show Supplier Material materials with Schmelzmassenflussrate of 3.8 g/10min	ASTM D1238, 190°C/2.16kg

Technological properties

Property
Application areas	Due to its combination of mechanical properties, ESCR resistance and fluidity, GREENETHENE G-3938 is suggested for the production of wide variety of tank applications for the storage of water, chemicals & Oils. GREENETHENE G-3938 can also be used for off-shore flotation buoys and road crash barriers.
Certifications	List of Constituents of Polyethylene in Contact with Foodstuffs, Pharmaceuticals and Drinking Water: IS 10141:2001, IS 12701:1996
Color	Natural, black, terracotta, fire red, yellow and blue.
Processing methods	Compression molded & rotomolded

G-3938 (LLDPE)

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften