Allgemein
Property | Temperature | Value | Comment |
---|---|---|---|
Dichte | 23.0 °C | 1.18 g/cm³ Show Supplier Material materials with Dichte of 1.18 g/cm³ | ISO1183 |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Biegefestigkeit | 23.0 °C | 90 MPa Show Supplier Material materials with Biegefestigkeit of 90 MPa | ISO178 |
Biegemodul | 23.0 °C | 2.7 GPa Show Supplier Material materials with Biegemodul of 2.7 GPa | ISO178 |
Dehnung | 23.0 °C | 50 % Show Supplier Material materials with Dehnung of 50 % | ISO527 |
Elastizitätsmodul | 23.0 °C | 3 GPa Show Supplier Material materials with Elastizitätsmodul of 3 GPa | ISO527 |
Schlagfestigkeit, Charpy gekerbt | -30.0 °C | 4 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 4 kJ/m² | ISO179 |
23.0 °C | 7 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 7 kJ/m² | ISO179 | |
Zugfestigkeit | 23.0 °C | 85 MPa Show Supplier Material materials with Zugfestigkeit of 85 MPa | ISO527 |
Thermisch
Property | Value | Comment |
---|---|---|
Heat deflection temperature, 1.80 MPa | 130 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 130 °C | ISO75 |
Technological properties
Property | ||
---|---|---|
Application areas | Oil cup, Preservative film | |
Processing methods | Drying Temperature: 70-80°C, Drying Time: 6-8 hr, Rear Temperature: 230°C, Middle Temperature: 250°C, Front Temperature: 260°C, Nozzle Temperature: 270°C, Mold Temperature: 80-100°C, Injection Pressure: 70-100 MPa |