PPS LGF30 LFT-G®

Alternative und Handelsbezeichungen
LFT-G® PPS-NA-LGF30 , PPS-GF30
Want to keep this datasheet? Save it now in your required format

Description

Polyphenylene Sulfide (PPS) reinforced with 30% glass fiber. The key features are:


  • High rigidity
  • Super heat-resistance
  • High liquidity
  • Low exhaust
  • Acid resistance, oil resistance, high temperature corrosion resistance, radiation resistance
  • Low creep, high rigidity
  • High hardness
  • Diese Materialdaten wurden von Xiamen LFT Composite Plastic Co.,ltd zur Verfügung gestellt

    Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
    Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Eigenschaften

    Allgemein

    PropertyTemperatureValueComment

    Dichte

    23.0 °C

    1.53 g/cm³

    Show Supplier Material materials with Dichte of 1.53 g/cm³

    ASTM D792

    Mechanisch

    PropertyTemperatureValueComment

    Biegefestigkeit

    23.0 °C

    214 MPa

    Show Supplier Material materials with Biegefestigkeit of 214 MPa

    ASTM D790

    Biegemodul

    23.0 °C

    13.48 GPa

    Show Supplier Material materials with Biegemodul of 13.48 GPa

    ASTM D790

    Dehnung

    23.0 °C

    1 - 2 %

    Show Supplier Material materials with Dehnung of 1 - 2 %

    ASTM D638

    Elastizitätsmodul

    23.0 °C

    13.86 GPa

    Show Supplier Material materials with Elastizitätsmodul of 13.86 GPa

    ASTM D790

    Impact strength, Izod notched, ASTM

    23.0 °C

    123 J/m

    Show Supplier Material materials with Impact strength, Izod notched, ASTM of 123 J/m

    ASTM D256

    Impact strength, Izod unnotched, ASTM

    23.0 °C

    514 J/m

    Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 514 J/m

    ASTM D4812

    Zugfestigkeit

    23.0 °C

    145 MPa

    Show Supplier Material materials with Zugfestigkeit of 145 MPa

    ASTM D638

    Thermisch

    PropertyValueComment

    Heat deflection temperature, 1.80 MPa

    266 °C

    Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 266 °C

    ASTM D648

    Entflammbarkeit

    HB ASTM D635, for 1.5mm

    Rheological Properties

    PropertyTemperatureValueComment

    Schrumpfung

    23.0 °C

    0.1 - 0.2 %

    Show Supplier Material materials with Schrumpfung of 0.1 - 0.2 %

    ASTM D955, (1/8 in (3.2 mm)section)

    Technological properties

    Property
    Application areas

    Chemical pump impeller, Valve core, Water heater connections, Water heater impeller, Chemical pump housing, Cooling water jacket.

    Fillers

    30% Glass Fiber

    Processing methods

    Injection Moulding. Injection Pressure 69 - 103 MPa, Melt Temperature 313 - 329 °C, Mould temperature 135 - 177 °C, Pre-drying 6 hrs @ 149 °C, Moisture Content 0.04%