Allgemein
Property | Temperature | Value | Comment |
---|---|---|---|
Dichte | 23.0 °C | 1.4 g/cm³ Show Material materials with Dichte of 1.4 g/cm³ | ISO 1183 |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Biegemodul | 23.0 °C | 2.56 GPa Show Material materials with Biegemodul of 2.56 GPa | ISO 178 |
Elastizitätsmodul | 23.0 °C | 2.6 GPa Show Material materials with Elastizitätsmodul of 2.6 GPa | ISO 527-1A, ISO 527-2 |
Schlagfestigkeit, Charpy gekerbt | 23.0 °C | 6.4 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 6.4 kJ/m² | ISO 179/1eA |
Schlagzähigkeit, Izod gekerbt | 23.0 °C | 5.4 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 5.4 kJ/m² | ISO 180/1A |
Streckgrenze | 23.0 °C | 65 MPa Show Material materials with Streckgrenze of 65 MPa | ISO 527-1, ISO 527-2 |
Thermisch
Property | Temperature | Value | Comment |
---|---|---|---|
Koeffizient der thermischen Ausdehnung | 23.0 °C | 1.2E-4 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.2E-4 1/K | ISO 11359-2 |
Schmelzpunkt | 167 °C Show Material materials with Schmelzpunkt of 167 °C | ISO 11357-1, ISO 11357-3, 10°C/min | |
Vicat-Erweichungstemperatur | 160 °C Show Material materials with Vicat-Erweichungstemperatur of 160 °C | ISO 306, 50°c/h, 50N | |
thermischer Ausdehnungskoeffizient, transversal | 23.0 °C | 1.2E-4 1/K Show Material materials with thermischer Ausdehnungskoeffizient, transversal of 1.2E-4 1/K | ISO 11359-2 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Schmelzvolumenflussrate | 8 cm³/10min Show Material materials with Schmelzvolumenflussrate of 8 cm³/10min | ISO 1133, 190°C/2.16 Kg | |
Schrumpfung | 23.0 °C | 1.8 % Show Material materials with Schrumpfung of 1.8 % | ISO 294-4, ISO 2577 |
Schrumpfung, diagonal | 23.0 °C | 1.8 % Show Material materials with Schrumpfung, diagonal of 1.8 % | ISO 294-4, ISO 2577 |
Technological properties
Property | ||
---|---|---|
Application areas | General Automotive Parts, Automotive Interiot Parts | |
Processing methods | Injection Molding: Drying Temperature: 100-120°C, Drying Time: 3-4 hr, Rear Temperature: 165-175°C, Middle Temperature: 170-180°C, Front Temperature: 170-180°C, Nozzle Temperature: 180-190°C, Melt Temperature: 180-190°C, Mold Temperature: 80-120°C, Back Pressure: 4 MPa, Screw Speed 100-200 rpm, Screw Compression Ratio: 2:1 to 2.5:1 |