3M™ Dyneon™ TFM™ (Modified PTFE Granules TFM 1610)

Want to keep this datasheet? Save it now in your required format

Description

Modified free-flowing suspension PTFE of the 2nd generation for compression moulding and ram extrusion applications like shaped parts, skived films, seals and valve seats.

Special Features are:

Meets ASTM D 4894 Type III, Grade 2 classification

Produced by suspension polymerisation

Good mould filling behaviour

Very good free-flowing properties

High surface quality, low content of pores and low permeation

Substantially lower deformation under load (“cold flow”)

Low stretch-void index

Good electrical and mechanical properties

Increased modulus of elasticity

Good weldability

Excellent chemical inertness

Low friction behaviour

Good flame retardance

Exceptional temperature resistance

Typical Properties:

Modified PTFE moulding and ram extrusion powder is the preferred grade for shaped parts requiring very good free-flowing, good mechanical and electrical properties, a denser polymer structure, significantly lower deformation under load and improved weldability.

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	2.16 g/cm³ Show Material materials with Dichte of 2.16 g/cm³	DIN EN ISO 12086
Partikelgröße		430000 nm Show Material materials with Partikelgröße of 430000 nm	ISO 13320, average value
Schüttdichte	23.0 °C	0.76 g/cm³ Show Material materials with Schüttdichte of 0.76 g/cm³	DIN EN ISO 60

Mechanisch

Property	Temperature	Value	Comment
Dehnung	23.0 °C	600 % Show Material materials with Dehnung of 600 %	DIN EN ISO 527-3, 0.2 mm film
Elastizitätsmodul	23.0 °C	0.65 GPa Show Material materials with Elastizitätsmodul of 0.65 GPa	DIN EN ISO 527
Härte, Shore D	23.0 °C	59 [-] Show Material materials with Härte, Shore D of 59 [-]	DIN EN ISO 868
Zugfestigkeit	23.0 °C	35 MPa Show Material materials with Zugfestigkeit of 35 MPa	DIN EN ISO 527-3, 0.2 mm film

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	100.0 °C	1.2E-4 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.2E-4 1/K	DIN 53 752, from 30°C to the mentioned temperature
	200.0 °C	1.4E-4 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.4E-4 1/K	DIN 53 752, from 30°C to the mentioned temperature
	260.0 °C	1.7E-4 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.7E-4 1/K	DIN 53 752, from 30°C to the mentioned temperature

Wärmeleitfähigkeit	23.0 °C	0.22 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.22 W/(m·K)	DIN 52612
Entflammbarkeit	V-0 UL94

Elektrisch

Property	Temperature	Value	Comment
Durchschlagfestigkeit	23.0 °C	82 kV/mm Show Material materials with Durchschlagfestigkeit of 82 kV/mm	DIN EN ISO 12086, 0.2 mm film
Surface resistivity	23.0 °C	1.00E+17 Ω/sq Show Material materials with Surface resistivity of 1.00E+17 Ω/sq	IEC 60093
spezifischer Widerstand	23.0 °C	1.00E+16 Ω·m Show Material materials with spezifischer Widerstand of 1.00E+16 Ω·m	IEC 60093

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	3.5 % Show Material materials with Schrumpfung of 3.5 %	Internal Dyneon method, Cylinder 45 mm diameter

Technological properties

Property
Application areas	3M™ Dyneon™ TFM™ Modified PTFE Granules TFM 1610 is suitable for shaped parts, isostatically moulded pump linings or automatic moulded goods enabling applications like static seals for highly demanding pumps or sealing elements for fittings. Furthermore due to its good elasticity the product enables special processing technologies like deep-drawing orblow-moulding.

3M™ Dyneon™ TFM™ (Modified PTFE Granules TFM 1610)

Description

Ashby charts

Anwendungen

Empfohlene Literatur

Eigenschaften