VALOX™ Resin 337

Want to keep this datasheet? Save it now in your required format

Description

Low temperature impact PBT. Automotive applications: underhood power distribution boxes and covers.

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.22 g/cm³ Show Material materials with Dichte of 1.22 g/cm³	ASTM D 792
Wasserabsorption	23.0 °C	0.1 % Show Material materials with Wasserabsorption of 0.1 %	ASTM D 570 \| 24 Hours

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	23.0 °C	1.79 GPa Show Material materials with Biegemodul of 1.79 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Elongation at yield	23.0 °C	3.9 % Show Material materials with Elongation at yield of 3.9 %	ASTM D 638 \| Type I, 50 mm/min
Flexural yield strength	23.0 °C	56 MPa Show Material materials with Flexural yield strength of 56 MPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Impact strength, Izod notched, ASTM	-30.0 °C	801 J/m Show Material materials with Impact strength, Izod notched, ASTM of 801 J/m	ASTM D 256
	23.0 °C	870 J/m Show Material materials with Impact strength, Izod notched, ASTM of 870 J/m	ASTM D 256

Impact strength, Izod unnotched, ASTM	-30.0 °C	3204 J/m Show Material materials with Impact strength, Izod unnotched, ASTM of 3204 J/m	ASTM D 4812
	23.0 °C	3204 J/m Show Material materials with Impact strength, Izod unnotched, ASTM of 3204 J/m	ASTM D 4812
	Unlock all property charts
Streckgrenze	23.0 °C	39 MPa Show Material materials with Streckgrenze of 39 MPa	ASTM D 638 \| Type I, 50 mm/min

Thermisch

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	47 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 47 °C	ASTM D 648 \| 1.82 MPa, 6.4 mm, unannealed

Rheological Properties

Property	Temperature	Value	Comment
Melt viscosity	23.0 °C	1200 Pa·s Show Material materials with Melt viscosity of 1200 Pa·s	SABIC method
Schmelzmassenflussrate		12.7 g/10min Show Material materials with Schmelzmassenflussrate of 12.7 g/10min	ASTM D 1238 \| 250°C/5.0 kgf
Schrumpfung	23.0 °C	2.4 - 2.7 % Show Material materials with Schrumpfung of 2.4 - 2.7 %	SABIC method \| 3.2 mm
Schrumpfung, diagonal	23.0 °C	2.4 - 2.7 % Show Material materials with Schrumpfung, diagonal of 2.4 - 2.7 %	SABIC method

Technological properties

Property
Application areas	Circuit Protection,LED lighting,Swimming Pool/Spa, underhood power distribution boxes and covers.
Processing methods	Drying Temperature: 120°C, Drying Time: 3-4hrs, Drying Time (Cumulative): 12hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 245-260°C, Nozzle Temperature: 240-255°C, Front - Zone 3 Temperature: 245-260°C, Middle - Zone 2 Temperature: 240-255°C, Rear - Zone 1 Temperature: 230-250°C, Mold Temperature: 50-75°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 50-100rpm, Shot to Cylinder Size: 40-80%, Vent Depth: 0.013-0.025mm