Allgemein
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dichte | 23.0 °C | 1.2 g/cm³ Show Material materials with Dichte of 1.2 g/cm³ | ASTM D 792 |
Wasserabsorption | 23.0 °C | 0.35 % Show Material materials with Wasserabsorption of 0.35 % | ISO 62 |
Wasseraufnahme, Gleichgewicht | 23.0 °C | 0.35 % Show Material materials with Wasseraufnahme, Gleichgewicht of 0.35 % | ASTM D 570 |
Mechanisch
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Biegemodul | 23.0 °C | 2.3 GPa Show Material materials with Biegemodul of 2.3 GPa | ISO 178 | 2 mm/min | ||
Elastizitätsmodul | 23.0 °C | 2.35 GPa Show Material materials with Elastizitätsmodul of 2.35 GPa | ASTM D 638 | 50 mm/min | ||
Elongation at yield | 23.0 °C | 6 % Show Material materials with Elongation at yield of 6 % | ASTM D 638 | Type I, 50 mm/min | ||
Flexural yield strength | 23.0 °C | 90 MPa Show Material materials with Flexural yield strength of 90 MPa | ISO 178 | 2 mm/min | ||
Schlagzähigkeit, Izod gekerbt | -30.0 °C | 12 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 12 kJ/m² | ISO 180/1A | ||
23.0 °C | 15 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 15 kJ/m² | ISO 180/1A | |||
Streckgrenze | 23.0 °C | 60 MPa Show Material materials with Streckgrenze of 60 MPa | ASTM D 638 | Type I, 50 mm/min | ||
Schlagzähigkeit, Izod ungekerbt | No Break @ 23,-30°C| ISO 180/1U | ||||
Thermisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Heat deflection temperature, 0.45 MPa | 132 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 132 °C | ISO 75/Bf | 0.45 MPa | |
Koeffizient der thermischen Ausdehnung | 23.0 °C | 7E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 7E-5 1/K | ASTM E 831 | -40°C to 95°C |
Vicat-Erweichungstemperatur | 138 °C Show Material materials with Vicat-Erweichungstemperatur of 138 °C | ASTM D 1525 | Rate B/50 | |
Wärmeleitfähigkeit | 23.0 °C | 0.2 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.2 W/(m·K) | ISO 8302 |
Elektrisch
Optisch
| Property | Value | Comment |
|---|---|---|
Brechungsindex | 1.59 [-] Show Material materials with Brechungsindex of 1.59 [-] | ISO 489 |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Schmelzmassenflussrate | 8.9 g/10min Show Material materials with Schmelzmassenflussrate of 8.9 g/10min | ASTM D 1238 | 250°C/1.2 kgf | |
Schmelzvolumenflussrate | 8 cm³/10min Show Material materials with Schmelzvolumenflussrate of 8 cm³/10min | ISO 1133 | 250°C/1.2 kg | |
Schrumpfung | 23.0 °C | 0.5 - 0.7 % Show Material materials with Schrumpfung of 0.5 - 0.7 % | SABIC method |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Data Management | |
| Processing methods | Drying Temperature: 120°C, Drying Time: 4-6hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 340-370°C, Nozzle Temperature: 340-370°C, Front - Zone 3 Temperature: 350-380°C, Middle - Zone 2 Temperature: 320-340°C, Rear - Zone 1 Temperature: 270-290°C, Hopper Temperature: 60-80°C, Mold Temperature: 75-95°C | |