Crastin® LW9030FR BK851

Alternative und Handelsbezeichungen
PBT+ASA-GF30FR(17)

Want to keep this datasheet? Save it now in your required format

Description

Common features of thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance. The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.Crastin® LW9030FRBK851 is a 30% glass fiber reinforced, flame retardant polybutylene terephthalate blend for injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.55 g/cm³ Show Material materials with Dichte of 1.55 g/cm³	ISO 1183

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	160 MPa Show Material materials with Biegefestigkeit of 160 MPa	ISO 178
Dehnung	23.0 °C	1.7 % Show Material materials with Dehnung of 1.7 %	ISO 527-1/-2
Elastizitätsmodul	23.0 °C	10.2 GPa Show Material materials with Elastizitätsmodul of 10.2 GPa	ISO 527-1/-2
Poissonzahl	23.0 °C	0.34 [-] Show Material materials with Poissonzahl of 0.34 [-]
Schlagfestigkeit, Charpy gekerbt	23.0 °C	7 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 7 kJ/m²	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt	23.0 °C	35 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 35 kJ/m²	ISO 179/1eU
Schlagzähigkeit, Izod ungekerbt	23.0 °C	6 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 6 kJ/m²	ISO 180/1A
Zugfestigkeit	23.0 °C	115 MPa Show Material materials with Zugfestigkeit of 115 MPa	ISO 527-1/-2

Thermisch

Property	Value	Comment
Relative temperature index, electrical	140 °C Show Material materials with Relative temperature index, electrical of 140 °C	UL 746B \| 240mil
Relative temperature index, mechanical impact	130 °C Show Material materials with Relative temperature index, mechanical impact of 130 °C	UL 746B \| 240mil
Relative temperature index, mechanical strength	140 °C Show Material materials with Relative temperature index, mechanical strength of 140 °C	UL 746B \| 240mil
Schmelzpunkt	225 °C Show Material materials with Schmelzpunkt of 225 °C	ISO 11357-1/-3 \| 18°F/min
Entflammbarkeit	Burning Behav. at 60mil nom. thickn.: V-0 class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: V-0 class, Thickness tested: 0.75 mm, UL recognition: yes -, Burning Behav. 5V at thickness h: 5VA class, Thickness tested: 2 mm, UL recognition: yes -, Oxygen index: 27 %, Glow Wire Flammability Index, 120mil: 960 °C, Glow Wire Ignition Temperature, 120mil: 960 °C, FMVSS Class: DNI -

Elektrisch

Property	Temperature	Value	Comment
Dielektrizitätskonstante, 1 MHz	23.0 °C	4.4 [-] Show Material materials with Dielektrizitätskonstante, 1 MHz of 4.4 [-]	IEC 62631-2-1
Dielektrizitätskonstante, 100 Hz	23.0 °C	4.7 [-] Show Material materials with Dielektrizitätskonstante, 100 Hz of 4.7 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	5.4E-3 [-] Show Material materials with Dissipation factor, 100Hz of 5.4E-3 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Durchschlagfestigkeit	23.0 °C	29 kV/mm Show Material materials with Durchschlagfestigkeit of 29 kV/mm	IEC 60243-1
Kriechstromfestigkeit	23.0 °C	325 V Show Material materials with Kriechstromfestigkeit of 325 V	IEC 60112
Surface resistivity	23.0 °C	1.00E+14 Ω/sq Show Material materials with Surface resistivity of 1.00E+14 Ω/sq	IEC 62631-3-2
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	min. \| IEC 62631-3-1

Rheological Properties

Property	Value	Comment
Schmelzmassenflussrate	14 g/10min Show Material materials with Schmelzmassenflussrate of 14 g/10min	ISO 1133 \| 250°C/5kg

Technological properties

Property
Fillers	30% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 250°C, Min. melt temperature: 240°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 3s/mm, Back pressure: As low as possible, Ejection temperature: 170°C

Crastin® LW9030FR BK851

Description

Ashby charts

Empfohlene Literatur

Eigenschaften