Allgemein
Property | Temperature | Value | Comment |
---|---|---|---|
Dichte | 23.0 °C | 0.88 g/cm³ Show Material materials with Dichte of 0.88 g/cm³ | ISO 1183 |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Biegemodul | 23.0 °C | 0.25 GPa Show Material materials with Biegemodul of 0.25 GPa | ISO 178 |
Dehnung | 23.0 °C | 280 % Show Material materials with Dehnung of 280 % | ISO 527-1/-2 |
Härte, Shore D | 23.0 °C | 33 [-] Show Material materials with Härte, Shore D of 33 [-] | ISO 7619-1 | 15 seconds |
Reißfestigkeit | 23.0 °C | 90 kN/m Show Material materials with Reißfestigkeit of 90 kN/m | ISO 34-1 |
Schlagzähigkeit, Izod ungekerbt | -40.0 °C | 68 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 68 kJ/m² | ISO 180/1A |
Zugfestigkeit | 23.0 °C | 14 MPa Show Material materials with Zugfestigkeit of 14 MPa | ISO 527-1/-2 |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Schmelzvolumenflussrate | 7 cm³/10min Show Material materials with Schmelzvolumenflussrate of 7 cm³/10min | ISO 1133 | |
Schrumpfung | 23.0 °C | 1.3 % Show Material materials with Schrumpfung of 1.3 % | ISO 294-4, 2577 |
Technological properties
Property | ||
---|---|---|
Processing methods | Drying Recommended: no, Melt Temperature Optimum: 250°C, Mold Temperature Optimum: 40°C, Min. mold temperature: 30°C, Max. mold temperature: 50°C, Hold pressure range: as low as possible, Back pressure: 1MPa |