Zytel® 70G50HSLA BK039B

Alternative und Handelsbezeichungen
PA66-GF50

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® 70G50HSLA BK039B is a 50% glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding. It has excellent flow characteristics.

Equivalent Materials

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.57 g/cm³ Show Material materials with Dichte of 1.57 g/cm³	ISO 1183
Wasserabsorption	23.0 °C	0.8 % Show Material materials with Wasserabsorption of 0.8 %	Sim. to ISO 62 \| Immersion 24h

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	400 MPa Show Material materials with Biegefestigkeit of 400 MPa	ISO 178
Biegemodul	23.0 °C	16 GPa Show Material materials with Biegemodul of 16 GPa	ISO 178
Dehnung	23.0 °C	2.4 % Show Material materials with Dehnung of 2.4 %	ISO 527-1/-2
Druckfestigkeit	23.0 °C	215 MPa Show Material materials with Druckfestigkeit of 215 MPa	ISO 604
Elastizitätsmodul	23.0 °C	17 GPa Show Material materials with Elastizitätsmodul of 17 GPa	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	300 MPa Show Material materials with Hardness, Ball Indentation of 300 MPa	ISO 2039-1
Poissonzahl	23.0 °C	0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]
Scherfestigkeit	23.0 °C	90 MPa Show Material materials with Scherfestigkeit of 90 MPa	ASTM D 732
Schlagfestigkeit, Charpy gekerbt	-6.0 °C	15 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 15 kJ/m²	ISO 179/1eA
	23.0 °C	15 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 15 kJ/m²	ISO 179/1eA

Schlagzähigkeit, Charpy ungekerbt	-6.0 °C	90 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 90 kJ/m²	ISO 179/1eU
	23.0 °C	90 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 90 kJ/m²	ISO 179/1eU
	Unlock all property charts
Zugfestigkeit	23.0 °C	240 MPa Show Material materials with Zugfestigkeit of 240 MPa	ISO 527-1/-2

Thermisch

Property	Temperature	Value	Comment
Glasübergangstemperatur		65 °C Show Material materials with Glasübergangstemperatur of 65 °C	ISO 11357-1/-2 \| 18°F/min
Heat deflection temperature, 0.45 MPa		261 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 261 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		255 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 255 °C	ISO 75-1/-2
Koeffizient der thermischen Ausdehnung	23.0 °C	1.9E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.9E-5 1/K	ASTM E 831 \| 55 - 160°C
Relative temperature index, electrical		120 °C Show Material materials with Relative temperature index, electrical of 120 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact		130 °C Show Material materials with Relative temperature index, mechanical impact of 130 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength		130 °C Show Material materials with Relative temperature index, mechanical strength of 130 °C	UL 746B \| 120mil
Schmelzpunkt		262 °C Show Material materials with Schmelzpunkt of 262 °C	ISO 11357-1/-3 \| 18°F/min
Spezifische Wärmekapazität	23.0 °C	1870 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 1870 J/(kg·K)	of melt
Vicat-Erweichungstemperatur		255 °C Show Material materials with Vicat-Erweichungstemperatur of 255 °C	ISO 306 \| 90°F/h, 11 lbf
Wärmeleitfähigkeit	23.0 °C	0.46 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.46 W/(m·K)	of solid
thermischer Ausdehnungskoeffizient, transversal	23.0 °C	6.1E-5 1/K Show Material materials with thermischer Ausdehnungskoeffizient, transversal of 6.1E-5 1/K	ASTM E 831 \| 23 - 55°C
Entflammbarkeit	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.83 mm, UL recognition: yes -, Oxygen index: 24 %, FMVSS Class: SE -

Elektrisch

Property	Temperature	Value	Comment
Kriechstromfestigkeit	23.0 °C	500 V Show Material materials with Kriechstromfestigkeit of 500 V	IEC 60112
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	IEC 62631-3-1

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.3 % Show Material materials with Schrumpfung of 0.3 %	ISO 294-4, 2577
Schrumpfung, diagonal	23.0 °C	0.8 % Show Material materials with Schrumpfung, diagonal of 0.8 %	ISO 294-4, 2577

Technological properties

Property
Fillers	50% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C

Zytel® 70G50HSLA BK039B

Description

Equivalent Materials

Ashby charts

Empfohlene Literatur

Eigenschaften