Minlon® IG38C1 BK434

Alternative und Handelsbezeichungen
PA66-(MD+GF)38

Want to keep this datasheet? Save it now in your required format

Description

Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.Minlon® IG38C1 BK434 is a 38% mineral/glass reinforced, heat stabilized, black polyamide 66 resin for injection molding.

Equivalent Materials

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.45 g/cm³ Show Material materials with Dichte of 1.45 g/cm³	ISO 1183
Wasserabsorption	23.0 °C	1 % Show Material materials with Wasserabsorption of 1 %	Sim. to ISO 62 \| Immersion 24h

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	23.0 °C	7 GPa Show Material materials with Biegemodul of 7 GPa	ISO 178
Dehnung	23.0 °C	2.5 % Show Material materials with Dehnung of 2.5 %	ISO 527-1/-2
Elastizitätsmodul	23.0 °C	7.5 GPa Show Material materials with Elastizitätsmodul of 7.5 GPa	ISO 527-1/-2
Poissonzahl	23.0 °C	0.34 [-] Show Material materials with Poissonzahl of 0.34 [-]
Schlagfestigkeit, Charpy gekerbt	-40.0 °C	3 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 3 kJ/m²	ISO 179/1eA
	-6.0 °C	3 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 3 kJ/m²	ISO 179/1eA
	23.0 °C	3 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 3 kJ/m²	ISO 179/1eA

Schlagzähigkeit, Charpy ungekerbt	23.0 °C	40 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 40 kJ/m²	ISO 179/1eU
Schlagzähigkeit, Izod gekerbt	23.0 °C	35 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 35 kJ/m²	ISO 180/1U
Schlagzähigkeit, Izod ungekerbt	-40.0 °C	3.8 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 3.8 kJ/m²	ISO 180/1A
	23.0 °C	4 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 4 kJ/m²	ISO 180/1A
	Unlock all property charts
Zugfestigkeit	23.0 °C	120 MPa Show Material materials with Zugfestigkeit of 120 MPa	ISO 527-1/-2

Thermisch

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	255 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 255 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa	230 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 230 °C	ISO 75-1/-2
Schmelzpunkt	263 °C Show Material materials with Schmelzpunkt of 263 °C	ISO 11357-1/-3 \| 18°F/min
Entflammbarkeit	FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.6 % Show Material materials with Schrumpfung of 0.6 %	ISO 294-4, 2577
Schrumpfung, diagonal	23.0 °C	0.8 % Show Material materials with Schrumpfung, diagonal of 0.8 %	ISO 294-4, 2577

Technological properties

Property
Fillers	38% Glass Fiber and Mineral Powder
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm

Minlon® IG38C1 BK434

Description

Equivalent Materials

Ashby charts

Empfohlene Literatur

Eigenschaften