Hytrel® HTR8163HVBK

Alternative und Handelsbezeichungen
TPC-ET

Want to keep this datasheet? Save it now in your required format

Description

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilisers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free.The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.For disposal, local regulations have to be observed.Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry.Hytrel® HTR8163HVBK is a 65 nom. Shore D, heat stabilised, plasticiser free high performance resin for extrusion; low temperature impact, excellent heat ageing, fatigue and crack propagation resistance; for air brake tubes.

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.23 g/cm³ Show Material materials with Dichte of 1.23 g/cm³	ISO 1183

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	23.0 °C	0.35 GPa Show Material materials with Biegemodul of 0.35 GPa	ISO 178
Dehnung	23.0 °C	480 % Show Material materials with Dehnung of 480 %	ISO 527-1/-2
Elastizitätsmodul	23.0 °C	0.34 GPa Show Material materials with Elastizitätsmodul of 0.34 GPa	ISO 527-1/-2
Elongation at yield	23.0 °C	30 % Show Material materials with Elongation at yield of 30 %	ISO 527-1/-2
Härte, Shore D	23.0 °C	64 [-] Show Material materials with Härte, Shore D of 64 [-]	max., ISO 7619-1
Poissonzahl	23.0 °C	0.48 [-] Show Material materials with Poissonzahl of 0.48 [-]
Reißfestigkeit	23.0 °C	200 kN/m Show Material materials with Reißfestigkeit of 200 kN/m	ISO 34-1
Reißfestigkeit, transversal	23.0 °C	185 kN/m Show Material materials with Reißfestigkeit, transversal of 185 kN/m	ISO 34-1
Schlagfestigkeit, Charpy gekerbt	-40.0 °C	8.5 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 8.5 kJ/m²	ISO 179/1eA
	-6.0 °C	12 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 12 kJ/m²	ISO 179/1eA
	23.0 °C	130 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 130 kJ/m²	ISO 179/1eA

Schlagzähigkeit, Izod ungekerbt	-40.0 °C	7.5 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 7.5 kJ/m²	No Break @ 23°C, ISO 179/1eU
Streckgrenze	23.0 °C	21 MPa Show Material materials with Streckgrenze of 21 MPa	ISO 527-1/-2
Zugfestigkeit	23.0 °C	44 MPa Show Material materials with Zugfestigkeit of 44 MPa	ISO 527-1/-2

Thermisch

Property	Temperature	Value	Comment
Brittleness temperature		-70 °C Show Material materials with Brittleness temperature of -70 °C	ISO 974
Heat deflection temperature, 0.45 MPa		85 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 85 °C	ISO 75-1/-2
Koeffizient der thermischen Ausdehnung	23.0 °C	2.2E-4 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.2E-4 1/K	ISO 11359-1/-2
Schmelzpunkt		210 °C Show Material materials with Schmelzpunkt of 210 °C	ISO 11357-1/-3 \| 18°F/min
Spezifische Wärmekapazität	23.0 °C	2090 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 2090 J/(kg·K)	of melt
Vicat-Erweichungstemperatur		196 °C Show Material materials with Vicat-Erweichungstemperatur of 196 °C	ISO 306 \| 90°F, 2 lbf
thermischer Ausdehnungskoeffizient, transversal	23.0 °C	1.7E-4 1/K Show Material materials with thermischer Ausdehnungskoeffizient, transversal of 1.7E-4 1/K	ISO 11359-1/-2
Entflammbarkeit	FMVSS Class: SE -, Burning rate, Thickness 1 mm: 17 mm/min

Rheological Properties

Property	Temperature	Value	Comment
Schmelzvolumenflussrate		5 cm³/10min Show Material materials with Schmelzvolumenflussrate of 5 cm³/10min	ISO 1133
Schrumpfung	23.0 °C	1.9 % Show Material materials with Schrumpfung of 1.9 %	ISO 294-4, 2577
Schrumpfung, diagonal	23.0 °C	1.8 % Show Material materials with Schrumpfung, diagonal of 1.8 %	ISO 294-4, 2577

Technological properties

Property
Processing methods	Drying Recommended: yes, Drying Temperature: 110°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.08%, Melt Temperature Optimum: 240°C, Min. melt temperature: 230°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 45°C, Min. mold temperature: 45°C, Max. mold temperature: 55°C

Hytrel® HTR8163HVBK

Description

Ashby charts

Empfohlene Literatur

Eigenschaften