Minlon® 12TA BKB124

Alternative und Handelsbezeichungen
PA66-I-MD32

Want to keep this datasheet? Save it now in your required format

Description

Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage. Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.Minlon® 12TA BKB124 is a 32% mineral reinforced, toughened, heat stabilized, black polyamide 66 resin for injection molding.

Equivalent Materials

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.38 g/cm³ Show Material materials with Dichte of 1.38 g/cm³	ISO 1183

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	23.0 °C	4.4 GPa Show Material materials with Biegemodul of 4.4 GPa	ISO 178
Dehnung	23.0 °C	15 % Show Material materials with Dehnung of 15 %	ISO 527-1/-2
Elastizitätsmodul	23.0 °C	4.8 GPa Show Material materials with Elastizitätsmodul of 4.8 GPa	ISO 527-1/-2
Poissonzahl	23.0 °C	0.36 [-] Show Material materials with Poissonzahl of 0.36 [-]
Schlagfestigkeit, Charpy gekerbt	-40.0 °C	4 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 4 kJ/m²	ISO 179/1eA
	-6.0 °C	5 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 5 kJ/m²	ISO 179/1eA
	23.0 °C	7 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 7 kJ/m²	ISO 179/1eA

Schlagzähigkeit, Charpy ungekerbt	-6.0 °C	75 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 75 kJ/m²	ISO 179/1eU
	23.0 °C	120 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 120 kJ/m²	ISO 179/1eU
	Unlock all property charts
Schlagzähigkeit, Izod gekerbt	-30.0 °C	85 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 85 kJ/m²	ISO 180/1U
	23.0 °C	110 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 110 kJ/m²	ISO 180/1U
	Unlock all property charts
Schlagzähigkeit, Izod ungekerbt	-40.0 °C	5 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 5 kJ/m²	ISO 180/1A
	-30.0 °C	6 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 6 kJ/m²	ISO 180/1A
	23.0 °C	7 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 7 kJ/m²	ISO 180/1A
	Unlock all property charts
Zugfestigkeit	23.0 °C	78 MPa Show Material materials with Zugfestigkeit of 78 MPa	ISO 527-1/-2

Thermisch

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	215 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 215 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa	80 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 80 °C	ISO 75-1/-2
Schmelzpunkt	257 °C Show Material materials with Schmelzpunkt of 257 °C	ISO 11357-1/-3 \| 18°F/min
Entflammbarkeit	FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Technological properties

Property
Fillers	32% Mineral Powder
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C

Minlon® 12TA BKB124

Description

Equivalent Materials

Ashby charts

Empfohlene Literatur

Eigenschaften