Zytel® 73G30L NC010

Alternative und Handelsbezeichungen
PA6-GF30

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® 73G30L NC010 is a 30% glass fiber reinforced polyamide 6 resin for injection molding.

Equivalent Materials

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.36 g/cm³ Show Material materials with Dichte of 1.36 g/cm³	ISO 1183
Wasserabsorption	23.0 °C	6.3 % Show Material materials with Wasserabsorption of 6.3 %	Sim. to ISO 62 \| 80mil

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	240 MPa Show Material materials with Biegefestigkeit of 240 MPa	ISO 178
Biegemodul	23.0 °C	8.5 GPa Show Material materials with Biegemodul of 8.5 GPa	ISO 178
Dehnung	23.0 °C	3.5 % Show Material materials with Dehnung of 3.5 %	ISO 527-1/-2
Druckfestigkeit	23.0 °C	160 MPa Show Material materials with Druckfestigkeit of 160 MPa	ISO 604
Elastizitätsmodul	23.0 °C	10 GPa Show Material materials with Elastizitätsmodul of 10 GPa	ISO 527-1/-2
Hardness, Ball Indentation	23.0 °C	233 MPa Show Material materials with Hardness, Ball Indentation of 233 MPa	ISO 2039-1
Poissonzahl	23.0 °C	0.34 [-] Show Material materials with Poissonzahl of 0.34 [-]
Scherfestigkeit	23.0 °C	60 MPa Show Material materials with Scherfestigkeit of 60 MPa	ASTM D 732
Schlagfestigkeit, Charpy gekerbt	-40.0 °C	11 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 11 kJ/m²	ISO 179/1eA
	-6.0 °C	11 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 11 kJ/m²	ISO 179/1eA
	23.0 °C	14 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 14 kJ/m²	ISO 179/1eA

Schlagzähigkeit, Charpy ungekerbt	-6.0 °C	80 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 80 kJ/m²	ISO 179/1eU
	23.0 °C	90 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 90 kJ/m²	ISO 179/1eU
	Unlock all property charts
Schlagzähigkeit, Izod gekerbt	-30.0 °C	90 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 90 kJ/m²	ISO 180/1U
	23.0 °C	100 kJ/m² Show Material materials with Schlagzähigkeit, Izod gekerbt of 100 kJ/m²	ISO 180/1U
	Unlock all property charts
Schlagzähigkeit, Izod ungekerbt	-40.0 °C	11 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 11 kJ/m²	ISO 180/1A
	-30.0 °C	11 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 11 kJ/m²	ISO 180/1A
	23.0 °C	15 kJ/m² Show Material materials with Schlagzähigkeit, Izod ungekerbt of 15 kJ/m²	ISO 180/1A
	Unlock all property charts
Zugfestigkeit	23.0 °C	180 MPa Show Material materials with Zugfestigkeit of 180 MPa	ISO 527-1/-2

Thermisch

Property	Temperature	Value	Comment
Glasübergangstemperatur		60 °C Show Material materials with Glasübergangstemperatur of 60 °C	ISO 11357-1/-2 \| 18°F/min
Heat deflection temperature, 0.45 MPa		220 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 220 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		210 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 210 °C	ISO 75-1/-2
Koeffizient der thermischen Ausdehnung	23.0 °C	1.4E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.4E-5 1/K	ISO 11359-1/-2 \| 23 - 55°C
Relative temperature index, electrical		65 °C Show Material materials with Relative temperature index, electrical of 65 °C	UL 746B \| 120mil
Relative temperature index, mechanical impact		65 °C Show Material materials with Relative temperature index, mechanical impact of 65 °C	UL 746B \| 120mil
Relative temperature index, mechanical strength		65 °C Show Material materials with Relative temperature index, mechanical strength of 65 °C	UL 746B \| 120mil
Schmelzpunkt		221 °C Show Material materials with Schmelzpunkt of 221 °C	ISO 11357-1/-3 \| 18°F/min
thermischer Ausdehnungskoeffizient, transversal	23.0 °C	1.3E-4 1/K Show Material materials with thermischer Ausdehnungskoeffizient, transversal of 1.3E-4 1/K	ISO 11359-1/-2 \| 55 - 160°C
Entflammbarkeit	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 3 mm, UL recognition: yes -, Oxygen index: 21 %, Glow Wire Flammability Index, 40mil: 700 °C, Glow Wire Flammability Index, 80mil: 700 °C, Glow Wire Flammability Index, 120mil: 750 °C, Glow Wire Ignition Temperature, 40mil: 700 °C, Glow Wire Ignition Temperature, 80mil: 700 °C, Glow Wire Ignition Temperature, 120mil: 700 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: 25 mm/min

Elektrisch

Property	Temperature	Value	Comment
Dielektrizitätskonstante, 100 Hz	23.0 °C	3.8 [-] Show Material materials with Dielektrizitätskonstante, 100 Hz of 3.8 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 100Hz of 0.02 [-]	IEC 62631-2-1
Kriechstromfestigkeit	23.0 °C	0 V Show Material materials with Kriechstromfestigkeit of 0 V	UL 746A
Volume resistivity	23.0 °C	1.00E+14 Ω·cm Show Material materials with Volume resistivity of 1.00E+14 Ω·cm	IEC 62631-3-1

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.2 % Show Material materials with Schrumpfung of 0.2 %	ISO 294-4, 2577
Schrumpfung, diagonal	23.0 °C	0.6 % Show Material materials with Schrumpfung, diagonal of 0.6 %	ISO 294-4, 2577

Technological properties

Property
Fillers	30% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 270°C, Min. melt temperature: 260°C, Max. melt temperature: 280°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm

Zytel® 73G30L NC010

Description

Equivalent Materials

Ashby charts

Empfohlene Literatur

Eigenschaften