Zytel® PLS95G50DH2 BK261

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® PLS95G50DH2 BK261 is a high flow 50% glass reinforced PA nylon resin using SHIELD Technology, only from DuPont providing exceptional Heat Resistance & High stiffness for automotive under hood applications like charge air cooler caps.

Equivalent Materials

ISO 16396-PA66

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.59 g/cm³ Show Material materials with Dichte of 1.59 g/cm³	ISO 1183
Wasserabsorption	23.0 °C	4.5 % Show Material materials with Wasserabsorption of 4.5 %	Sim. to ISO 62 \| 80mil

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	370 MPa Show Material materials with Biegefestigkeit of 370 MPa	ISO 178
Biegemodul	23.0 °C	16 GPa Show Material materials with Biegemodul of 16 GPa	ISO 178
Dehnung	23.0 °C	2.6 % Show Material materials with Dehnung of 2.6 %	ISO 527-1/-2
Elastizitätsmodul	23.0 °C	17 GPa Show Material materials with Elastizitätsmodul of 17 GPa	ISO 527-1/-2
Poissonzahl	23.0 °C	0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]
Schlagfestigkeit, Charpy gekerbt	-6.0 °C	16 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 16 kJ/m²	ISO 179/1eA
	23.0 °C	15 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 15 kJ/m²	ISO 179/1eA

Schlagzähigkeit, Charpy ungekerbt	-6.0 °C	80 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 80 kJ/m²	ISO 179/1eU
	23.0 °C	90 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 90 kJ/m²	ISO 179/1eU
	Unlock all property charts
Zugfestigkeit	23.0 °C	240 MPa Show Material materials with Zugfestigkeit of 240 MPa	ISO 527-1/-2

Thermisch

Property	Temperature	Value	Comment
Heat deflection temperature, 0.45 MPa		263 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 263 °C	ISO 75-1/-2
Heat deflection temperature, 1.80 MPa		254 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 254 °C	ISO 75-1/-2
Koeffizient der thermischen Ausdehnung	23.0 °C	5E-6 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 5E-6 1/K	ISO 11359-1/-2 \| 23 - 55°C
Schmelzpunkt		267 °C Show Material materials with Schmelzpunkt of 267 °C	ISO 11357-1/-3 \| 18°F/min
thermischer Ausdehnungskoeffizient, transversal	23.0 °C	1.2E-4 1/K Show Material materials with thermischer Ausdehnungskoeffizient, transversal of 1.2E-4 1/K	ISO 11359-1/-2 \| 55 - 160°C
Entflammbarkeit	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, FMVSS Class: B -, Burning rate, Thickness 1 mm: 42 mm/min

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.3 % Show Material materials with Schrumpfung of 0.3 %	ISO 294-4, 2577
Schrumpfung, diagonal	23.0 °C	0.6 % Show Material materials with Schrumpfung, diagonal of 0.6 %	ISO 294-4, 2577

Technological properties

Property
Fillers	50% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm

Zytel® PLS95G50DH2 BK261

Description

Equivalent Materials

Ashby charts

Empfohlene Literatur

Eigenschaften