Allgemein
Property | Value |
---|---|
Dichte | 1.03 - 1.09 g/cm³ Show Material materials with Dichte of 1.03 - 1.09 g/cm³ |
Mechanisch
Property | Value | Comment | |
---|---|---|---|
Dehnung | 500 % Show Material materials with Dehnung of 500 % | ||
Elastizitätsmodul | 1.2 - 1.6 GPa Show Material materials with Elastizitätsmodul of 1.2 - 1.6 GPa | ||
Schlagfestigkeit, Charpy gekerbt | 7.0 - 13.0 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 7.0 - 13.0 kJ/m² | ||
Zugfestigkeit | 45.0 - 55.0 MPa Show Material materials with Zugfestigkeit of 45.0 - 55.0 MPa | at 10-30% strain | |
Schlagzähigkeit, Charpy ungekerbt | no break |
Thermisch
Property | Value |
---|---|
Koeffizient der thermischen Ausdehnung | 9e-05 - 0.0002 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 9e-05 - 0.0002 1/K |
Schmelzpunkt | 215.0 - 225.0 °C Show Material materials with Schmelzpunkt of 215.0 - 225.0 °C |
Spezifische Wärmekapazität | 1800 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 1800 J/(kg·K) |
Wärmeleitfähigkeit | 0.23 - 0.25 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.23 - 0.25 W/(m·K) |
Entflammbarkeit | UL 94 V2 |
Elektrisch
Property | Value |
---|---|
Dielektrizitätskonstante | 3.1 [-] Show Material materials with Dielektrizitätskonstante of 3.1 [-] |
4 [-] Show Material materials with Dielektrizitätskonstante of 4 [-] | |
spezifischer Widerstand | 1000000000.0 - 10000000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 1000000000.0 - 10000000000000.0 Ω·m |
Optisch
Property | Value |
---|---|
Transparenz | no |
Technological properties
Property | ||
---|---|---|
Application areas | Automotive cooling systems, compressed air systems, hydraulic systems, fuel systems | |
Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
Processing methods | Injection molding, extrusion |