Eigenschaften
Allgemein
| Property | Value |
|---|---|
Dichte | 1.22 - 1.24 g/cm³ Show Material materials with Dichte of 1.22 - 1.24 g/cm³ |
Mechanisch
| Property | Value | Comment |
|---|---|---|
Dehnung | 5.0 - 8.0 % Show Material materials with Dehnung of 5.0 - 8.0 % | |
Elastizitätsmodul | 5.5 - 7.5 GPa Show Material materials with Elastizitätsmodul of 5.5 - 7.5 GPa | |
Schlagfestigkeit, Charpy gekerbt | 15.0 - 25.0 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 15.0 - 25.0 kJ/m² | |
Schlagzähigkeit, Charpy ungekerbt | 60 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 60 kJ/m² | |
100 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 100 kJ/m² | ||
Zugfestigkeit | 80.0 - 120.0 MPa Show Material materials with Zugfestigkeit of 80.0 - 120.0 MPa | at 5-8% strain |
Thermisch
| Property | Value |
|---|---|
Koeffizient der thermischen Ausdehnung | 2e-05 - 0.00015 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2e-05 - 0.00015 1/K |
Schmelzpunkt | 170.0 - 180.0 °C Show Material materials with Schmelzpunkt of 170.0 - 180.0 °C |
Wärmeleitfähigkeit | 0.25 - 0.26 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.25 - 0.26 W/(m·K) |
Entflammbarkeit | UL 94 HB |
Elektrisch
| Property | Value |
|---|---|
Dielektrizitätskonstante | 3 [-] Show Material materials with Dielektrizitätskonstante of 3 [-] |
5 [-] Show Material materials with Dielektrizitätskonstante of 5 [-] | |
spezifischer Widerstand | 10000000000.0 - 10000000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 10000000000.0 - 10000000000000.0 Ω·m |
Optisch
| Property | Value |
|---|---|
Transparenz | no |
Technological properties
| Property | ||
|---|---|---|
| Application areas | fuel systems, heating systems, ball-bearing holders | |
| Fillers | 30% Glass Fiber | |
| Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
| Processing methods | Injection molding | |