Allgemein
| Property | Value |
|---|---|
Dichte | 1.19 - 1.25 g/cm³ Show Material materials with Dichte of 1.19 - 1.25 g/cm³ |
Mechanisch
| Property | Value | Comment |
|---|---|---|
Dehnung | 2.5 - 3.0 % Show Material materials with Dehnung of 2.5 - 3.0 % | |
Elastizitätsmodul | 5.6 - 6.7 GPa Show Material materials with Elastizitätsmodul of 5.6 - 6.7 GPa | |
Schlagfestigkeit, Charpy gekerbt | 7.0 - 14.0 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 7.0 - 14.0 kJ/m² | |
Schlagzähigkeit, Charpy ungekerbt | 25 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 25 kJ/m² | |
50 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 50 kJ/m² | ||
Zugfestigkeit | 80.0 - 110.0 MPa Show Material materials with Zugfestigkeit of 80.0 - 110.0 MPa | at 2.5-3% strain |
Thermisch
| Property | Value |
|---|---|
Koeffizient der thermischen Ausdehnung | 3e-05 - 7e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 3e-05 - 7e-05 1/K |
Wärmeleitfähigkeit | 0.23 - 0.26 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.23 - 0.26 W/(m·K) |
Entflammbarkeit | UL 94 HB |
Elektrisch
| Property | Value |
|---|---|
Dielektrizitätskonstante | 2.7 [-] Show Material materials with Dielektrizitätskonstante of 2.7 [-] |
3.5 [-] Show Material materials with Dielektrizitätskonstante of 3.5 [-] | |
spezifischer Widerstand | 10000000000000.0 - 1000000000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 10000000000000.0 - 1000000000000000.0 Ω·m |
Optisch
| Property | Value |
|---|---|
Transparenz | no |
Technological properties
| Property | ||
|---|---|---|
| Application areas | levers, brackets, connectors, pumps housings | |
| Fillers | 20% Glass Fiber | |
| Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
| Processing methods | Injection molding, extrusion | |