Allgemein
Property | Value |
---|---|
Dichte | 1.75 - 1.9 g/cm³ Show Material materials with Dichte of 1.75 - 1.9 g/cm³ |
Mechanisch
Property | Value | Comment |
---|---|---|
Dehnung | 0.4 - 0.8 % Show Material materials with Dehnung of 0.4 - 0.8 % | |
Elastizitätsmodul | 7.0 - 9.0 GPa Show Material materials with Elastizitätsmodul of 7.0 - 9.0 GPa | |
Schlagfestigkeit, Charpy gekerbt | 1.5 - 2.5 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 1.5 - 2.5 kJ/m² | |
Schlagzähigkeit, Charpy ungekerbt | 2.5 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 2.5 kJ/m² | |
4.5 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 4.5 kJ/m² | ||
Zugfestigkeit | 30.0 - 50.0 MPa Show Material materials with Zugfestigkeit of 30.0 - 50.0 MPa | at 0.4-0.8% strain |
Thermisch
Property | Value |
---|---|
Koeffizient der thermischen Ausdehnung | 2e-05 - 3e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2e-05 - 3e-05 1/K |
Wärmeleitfähigkeit | 0.6 - 0.7 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.6 - 0.7 W/(m·K) |
Entflammbarkeit | UL 94 V1 |
Elektrisch
Property | Value |
---|---|
Dielektrizitätskonstante | 3 [-] Show Material materials with Dielektrizitätskonstante of 3 [-] |
6 [-] Show Material materials with Dielektrizitätskonstante of 6 [-] | |
spezifischer Widerstand | 10000000000.0 - 100000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 10000000000.0 - 100000000000.0 Ω·m |
Optisch
Property | Value |
---|---|
Transparenz | no |
Technological properties
Property | ||
---|---|---|
Application areas | electric motor slip ring commutators, bobbins | |
Fillers | 50% Mica Fiber | |
Processing methods | Injection molding, transfer molding, compression molding |