Allgemein
Property | Value |
---|---|
Dichte | 1.5 - 1.7 g/cm³ Show Material materials with Dichte of 1.5 - 1.7 g/cm³ |
Mechanisch
Property | Value |
---|---|
Elastizitätsmodul | 6.5 - 9.0 GPa Show Material materials with Elastizitätsmodul of 6.5 - 9.0 GPa |
Schlagfestigkeit, Charpy gekerbt | 1.5 - 1.7 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 1.5 - 1.7 kJ/m² |
Schlagzähigkeit, Charpy ungekerbt | 5 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 5 kJ/m² |
14 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 14 kJ/m² | |
Zugfestigkeit | 60.0 - 80.0 MPa Show Material materials with Zugfestigkeit of 60.0 - 80.0 MPa |
Thermisch
Property | Value |
---|---|
Koeffizient der thermischen Ausdehnung | 2.5e-05 - 4e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.5e-05 - 4e-05 1/K |
Wärmeleitfähigkeit | 0.3 - 0.45 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.3 - 0.45 W/(m·K) |
Entflammbarkeit | UL 94 V0 |
Elektrisch
Property | Value |
---|---|
Dielektrizitätskonstante | 8 [-] Show Material materials with Dielektrizitätskonstante of 8 [-] |
13.5 [-] Show Material materials with Dielektrizitätskonstante of 13.5 [-] | |
spezifischer Widerstand | 10000000000.0 - 100000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 10000000000.0 - 100000000000.0 Ω·m |
Optisch
Property | Value |
---|---|
Transparenz | no |
Technological properties
Property | ||
---|---|---|
Application areas | Contact strips, contact clamps, switchgears | |
Fillers | 35% Cellulose Powder and 10% Mineral Powder | |
Processing methods | Injection molding, compression molding |