DIN 17743 Grade NiCu30Fe soft annealed (+A)

Want to keep this datasheet? Save it now in your required format

Description

The material NiCu30Fe with the material number 2.4360 is contained in the VdTÜV-Werkstoffblatt 263 : 1999-03 and in the Werkstoffhandbuch der Deutschen Luftfahrt in the Werkstoffleistungsblatt editions WL 2.4360-1 : 1993-02, 2.4360-2 : 1961-03. According to VdTÜV-Wbl 263 : 1999-03, this nickel-wrought alloy can be applied for pressure vessels corrsponding to TRB 100 as well as, in interpreting the AD-Merkblatt W 2 faithfully to its meaning, from -10 to 425 °C, and it can be applied in the nuclear engineering as far as the rules of nuclear engineering or the object-related specifications permit the use of -10 to 425 °C. The weldability is given for metal-arc welding with covered rod electrodes (S-NiCu30Mn), gas-shielded welding with (wire) rods (S-NiCu30MnTi). Resistance welding is up to an sheet thickness of 3 mm possible. No preheating and no heat-treatment neccessary after welding. The material have to be welded in the soft annealed or stress relieved condition. Welding of the material also possible after 5 % cold forming and stress relieve annealing. Stress relieve annaeling is necessary if internal stress existent after the welding. The material is cold and hot formable. For the Ni-base alloy acc. DIN 17743 : 2002-09 is valid: The material is applied in the form of strips, sheets, tubes, bars, wires and forgings for corrosion-resistant construction components. NiCu30Fe possesses favourable mechanical and corrosion-chemical properties. It shows good strength and toughness. Good durability in hydrofluoric acid, sulphuric acid, non-oxidizing diluted acids, lyes and salt solutions, organic acids as well as in dry gases like oxygen, chlorine, hydrogen chloride, sulphur dioxide and carbon oxide. The material is free of chlorine-induced stress cracking corrosion. In the presence of components with an oxidizing effect like iron salts or copper salts, the use of the material is not to be recommended. Application in the offshore technology, e.g. for capacitors, pipelines, plating and valves and fittings, for plants of the chemical and petrochemical manufacturing technology, e.g. centrifuges in salt processing plants, for plants and construction components of ships, e.g. valves, fire extinguishing systems, pumps and water propeller shafts, in the energy technology, e.g. high-pressure feed-water heaters and coolers, in the environmental technology, e.g. evaporation plants and crystallizers in the sewage technology. Processing properties: Formability: very good Weldability: good

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

Inconel 625: Properties, Applications and Production

Inconel 718: Properties, Applications and Production

Nickel-Based Superalloys: Properties, Production, and Applications

Superalloys: Properties, Processing, and Applications

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	20.0 °C	8.8 - 8.82 g/cm³ Show Material materials with Dichte of 8.8 - 8.82 g/cm³

Mechanisch

Property	Temperature	Value
Dehnung	20.0 °C	30 - 35 % Show Material materials with Dehnung of 30 - 35 %
	100.0 °C	30 % Show Material materials with Dehnung of 30 %
	200.0 °C	30 % Show Material materials with Dehnung of 30 %
	300.0 °C	30 % Show Material materials with Dehnung of 30 %
	400.0 °C	30 % Show Material materials with Dehnung of 30 %
	425.0 °C	30 % Show Material materials with Dehnung of 30 %

Dehnung A50	20.0 °C	30 % Show Material materials with Dehnung A50 of 30 %
Elastizitätsmodul	20.0 °C	182 GPa Show Material materials with Elastizitätsmodul of 182 GPa
	100.0 °C	180 GPa Show Material materials with Elastizitätsmodul of 180 GPa
	200.0 °C	177 GPa Show Material materials with Elastizitätsmodul of 177 GPa
	300.0 °C	170 GPa Show Material materials with Elastizitätsmodul of 170 GPa
	400.0 °C	165 GPa Show Material materials with Elastizitätsmodul of 165 GPa
	500.0 °C	150 GPa Show Material materials with Elastizitätsmodul of 150 GPa
	Unlock all property charts
Elongation A100	20.0 °C	20 - 30 % Show Material materials with Elongation A100 of 20 - 30 %
Härte, Brinell	20.0 °C	140 - 150 [-] Show Material materials with Härte, Brinell of 140 - 150 [-]
Härte, Vickers, 10	20.0 °C	155 [-] Show Material materials with Härte, Vickers, 10 of 155 [-]
Scherfestigkeit	20.0 °C	340 MPa Show Material materials with Scherfestigkeit of 340 MPa
Streckgrenze Rp 0,2	20.0 °C	150 - 180 MPa Show Material materials with Streckgrenze Rp 0,2 of 150 - 180 MPa
	100.0 °C	150 MPa Show Material materials with Streckgrenze Rp 0,2 of 150 MPa
	150.0 °C	140 MPa Show Material materials with Streckgrenze Rp 0,2 of 140 MPa
	200.0 °C	135 MPa Show Material materials with Streckgrenze Rp 0,2 of 135 MPa
	250.0 °C	132 MPa Show Material materials with Streckgrenze Rp 0,2 of 132 MPa
	300.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2 of 130 MPa
	350.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2 of 130 MPa
	400.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2 of 130 MPa
	425.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2 of 130 MPa
	Unlock all property charts
Streckgrenze Rp 0,2, transversal	100.0 °C	150 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 150 MPa
	150.0 °C	140 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 140 MPa
	200.0 °C	135 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 135 MPa
	250.0 °C	132 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 132 MPa
	300.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 130 MPa
	350.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 130 MPa
	400.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 130 MPa
	425.0 °C	130 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 130 MPa
	Unlock all property charts
Streckgrenze Rp 1,0	20.0 °C	205 - 210 MPa Show Material materials with Streckgrenze Rp 1,0 of 205 - 210 MPa
	100.0 °C	220 MPa Show Material materials with Streckgrenze Rp 1,0 of 220 MPa
	200.0 °C	210 MPa Show Material materials with Streckgrenze Rp 1,0 of 210 MPa
	300.0 °C	190 MPa Show Material materials with Streckgrenze Rp 1,0 of 190 MPa
	400.0 °C	180 MPa Show Material materials with Streckgrenze Rp 1,0 of 180 MPa
	Unlock all property charts
Zugfestigkeit	20.0 °C	400 - 730 MPa Show Material materials with Zugfestigkeit of 400 - 730 MPa
	100.0 °C	420 MPa Show Material materials with Zugfestigkeit of 420 MPa
	150.0 °C	400 MPa Show Material materials with Zugfestigkeit of 400 MPa
	200.0 °C	390 MPa Show Material materials with Zugfestigkeit of 390 MPa
	250.0 °C	385 MPa Show Material materials with Zugfestigkeit of 385 MPa
	300.0 °C	380 MPa Show Material materials with Zugfestigkeit of 380 MPa
	350.0 °C	375 MPa Show Material materials with Zugfestigkeit of 375 MPa
	400.0 °C	370 MPa Show Material materials with Zugfestigkeit of 370 MPa
	425.0 °C	360 - 370 MPa Show Material materials with Zugfestigkeit of 360 - 370 MPa
	Unlock all property charts
Zugfestigkeit, transversal	100.0 °C	420 MPa Show Material materials with Zugfestigkeit, transversal of 420 MPa
	150.0 °C	400 MPa Show Material materials with Zugfestigkeit, transversal of 400 MPa
	200.0 °C	390 MPa Show Material materials with Zugfestigkeit, transversal of 390 MPa
	250.0 °C	385 MPa Show Material materials with Zugfestigkeit, transversal of 385 MPa
	300.0 °C	380 MPa Show Material materials with Zugfestigkeit, transversal of 380 MPa
	350.0 °C	375 MPa Show Material materials with Zugfestigkeit, transversal of 375 MPa
	400.0 °C	370 MPa Show Material materials with Zugfestigkeit, transversal of 370 MPa
	425.0 °C	370 MPa Show Material materials with Zugfestigkeit, transversal of 370 MPa
	Unlock all property charts

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	-130.0 °C	1.15E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.15E-5 1/K
	-75.0 °C	1.21E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.21E-5 1/K
	93.0 °C	1.39E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.39E-5 1/K
	100.0 °C	1.38E-5 - 1.39E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.38E-5 - 1.39E-5 1/K
	200.0 °C	1.45E-5 - 1.55E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.45E-5 - 1.55E-5 1/K
	300.0 °C	1.49E-5 - 1.58E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.49E-5 - 1.58E-5 1/K
	400.0 °C	1.52E-5 - 1.6E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.52E-5 - 1.6E-5 1/K
	500.0 °C	1.56E-5 - 1.63E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.56E-5 - 1.63E-5 1/K
	600.0 °C	1.6E-5 - 1.66E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.6E-5 - 1.66E-5 1/K
	700.0 °C	1.64E-5 - 1.7E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.64E-5 - 1.7E-5 1/K
	800.0 °C	1.68E-5 - 1.74E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.68E-5 - 1.74E-5 1/K
	900.0 °C	1.73E-5 - 1.77E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.73E-5 - 1.77E-5 1/K
	Unlock all property charts
Max. Betriebstemperatur, lang		-10 - 450 °C Show Material materials with Max. Betriebstemperatur, lang of -10 - 450 °C
Schmelzpunkt		1170 - 1365 °C Show Material materials with Schmelzpunkt of 1170 - 1365 °C	Typical for Nickel Copper Alloy
Spezifische Wärmekapazität	20.0 °C	427 - 452 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 427 - 452 J/(kg·K)
	100.0 °C	445 - 461 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 445 - 461 J/(kg·K)
	200.0 °C	465 - 473 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 465 - 473 J/(kg·K)
	300.0 °C	478 - 484 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 478 - 484 J/(kg·K)
	400.0 °C	490 - 495 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 490 - 495 J/(kg·K)
	500.0 °C	523 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 523 J/(kg·K)
	600.0 °C	544 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 544 J/(kg·K)
	700.0 °C	555 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 555 J/(kg·K)
	800.0 °C	566 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 566 J/(kg·K)
	900.0 °C	577 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 577 J/(kg·K)
	1000.0 °C	587 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 587 J/(kg·K)
	1150.0 °C	603 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 603 J/(kg·K)
	Unlock all property charts
Wärmeleitfähigkeit	-130.0 °C	22 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 22 W/(m·K)
	-75.0 °C	24 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 24 W/(m·K)
	20.0 °C	21.8 - 26 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 21.8 - 26 W/(m·K)
	100.0 °C	25.4 - 29.5 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 25.4 - 29.5 W/(m·K)
	200.0 °C	28.7 - 33 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 28.7 - 33 W/(m·K)
	300.0 °C	31.9 - 36.5 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 31.9 - 36.5 W/(m·K)
	400.0 °C	34.7 - 440 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 34.7 - 440 W/(m·K)
	500.0 °C	38.4 - 44 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 38.4 - 44 W/(m·K)
	600.0 °C	41.2 - 48.5 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 41.2 - 48.5 W/(m·K)
	700.0 °C	43.1 - 52 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 43.1 - 52 W/(m·K)
	800.0 °C	45.1 - 56 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 45.1 - 56 W/(m·K)
	900.0 °C	47.5 - 58 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 47.5 - 58 W/(m·K)
	1000.0 °C	50 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 50 W/(m·K)
	1150.0 °C	52.9 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 52.9 W/(m·K)
	Unlock all property charts

Elektrisch

Property	Temperature	Value
spezifischer Widerstand	20.0 °C	5.13E-7 - 5.47E-7 Ω·m Show Material materials with spezifischer Widerstand of 5.13E-7 - 5.47E-7 Ω·m
	100.0 °C	5.4E-7 Ω·m Show Material materials with spezifischer Widerstand of 5.4E-7 Ω·m
	200.0 °C	5.55E-7 Ω·m Show Material materials with spezifischer Widerstand of 5.55E-7 Ω·m
	300.0 °C	5.75E-7 Ω·m Show Material materials with spezifischer Widerstand of 5.75E-7 Ω·m
	400.0 °C	5.85E-7 Ω·m Show Material materials with spezifischer Widerstand of 5.85E-7 Ω·m
	500.0 °C	6E-7 Ω·m Show Material materials with spezifischer Widerstand of 6E-7 Ω·m
	600.0 °C	6.18E-7 Ω·m Show Material materials with spezifischer Widerstand of 6.18E-7 Ω·m
	700.0 °C	6.35E-7 Ω·m Show Material materials with spezifischer Widerstand of 6.35E-7 Ω·m
	800.0 °C	6.55E-7 Ω·m Show Material materials with spezifischer Widerstand of 6.55E-7 Ω·m
	900.0 °C	6.75E-7 Ω·m Show Material materials with spezifischer Widerstand of 6.75E-7 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Aluminium	0.5 % Show Material materials with Aluminium of 0.5 %
Eisen	1 - 2.5 % Show Material materials with Eisen of 1 - 2.5 %
Kobalt	2 % Show Material materials with Kobalt of 2 %
Kohlenstoff	0.15 - 0.3 % Show Material materials with Kohlenstoff of 0.15 - 0.3 %
Kupfer	28 - 34 % Show Material materials with Kupfer of 28 - 34 %
Mangan	2 % Show Material materials with Mangan of 2 %
Nickel	63 % Show Material materials with Nickel of 63 %
Schwefel	0.02 - 0.024 % Show Material materials with Schwefel of 0.02 - 0.024 %
Silizium	0.5 % Show Material materials with Silizium of 0.5 %
Titan	0.3 % Show Material materials with Titan of 0.3 %

Looking for suppliers of this material? Click to see 2 supplier of DIN 17743 Grade NiCu30Fe soft annealed (+A) on Matmatch