EN 1652 Grade CuZn39Pb0.5 R400

Want to keep this datasheet? Save it now in your required format

Description

Material CuZn39Pb0,5, mat. No. CW610N, is an unhardenable wrought alloy. to the comparable make CuZn39Pb0,5, mat. No. 2.0372 acc. to DIN 17660 : 1983-12 applies: High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for the unleaded brass grade of the same Zn-content. Machinability is improved by Pb-addition. Corrosion resistance to water, several saline solutions and organic liquids is also lower than for unleaded alloys of the same zinc-content. Processing properties: warm forming: very good cold forming: moderately machinability: good hard soldering: moderately soft soldering: very good TIG-welding: moderately burnishing: very good Application: For plug pins, fitting parts, rivets, condenser plates, floor plate screeding and drawing instruments.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	20.0 °C	8.4 g/cm³ Show Material materials with Dichte of 8.4 g/cm³

Mechanisch

Property	Temperature	Value
Dehnung	20.0 °C	20 - 23 % Show Material materials with Dehnung of 20 - 23 %
Dehnung A50	20.0 °C	14 % Show Material materials with Dehnung A50 of 14 %
Dehnung, transversal	20.0 °C	23 % Show Material materials with Dehnung, transversal of 23 %
Elastizitätsmodul	-195.0 °C	108 GPa Show Material materials with Elastizitätsmodul of 108 GPa
	-100.0 °C	106 GPa Show Material materials with Elastizitätsmodul of 106 GPa
	20.0 °C	102 - 105 GPa Show Material materials with Elastizitätsmodul of 102 - 105 GPa
	50.0 °C	100 GPa Show Material materials with Elastizitätsmodul of 100 GPa
	100.0 °C	93 GPa Show Material materials with Elastizitätsmodul of 93 GPa
	150.0 °C	91 GPa Show Material materials with Elastizitätsmodul of 91 GPa
	200.0 °C	89 GPa Show Material materials with Elastizitätsmodul of 89 GPa
	250.0 °C	83 GPa Show Material materials with Elastizitätsmodul of 83 GPa

Härte, Vickers	20.0 °C	110 [-] Show Material materials with Härte, Vickers of 110 [-]
Schubmodule	20.0 °C	37 GPa Show Material materials with Schubmodule of 37 GPa
Streckgrenze Rp 0,2	20.0 °C	200 MPa Show Material materials with Streckgrenze Rp 0,2 of 200 MPa
	50.0 °C	200 MPa Show Material materials with Streckgrenze Rp 0,2 of 200 MPa
	100.0 °C	190 MPa Show Material materials with Streckgrenze Rp 0,2 of 190 MPa
	150.0 °C	180 MPa Show Material materials with Streckgrenze Rp 0,2 of 180 MPa
	Unlock all property charts
Streckgrenze Rp 0,2, transversal	20.0 °C	200 - 240 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 200 - 240 MPa
	50.0 °C	200 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 200 MPa
	100.0 °C	190 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 190 MPa
	150.0 °C	180 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 180 MPa
	Unlock all property charts
Zugfestigkeit	20.0 °C	400 - 480 MPa Show Material materials with Zugfestigkeit of 400 - 480 MPa
Zugfestigkeit, transversal	20.0 °C	400 MPa Show Material materials with Zugfestigkeit, transversal of 400 MPa

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	200.0 °C	2.04E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.04E-5 1/K
Schmelzpunkt		875 - 1075 °C Show Material materials with Schmelzpunkt of 875 - 1075 °C	Typical for Wrought Copper Brass
Spezifische Wärmekapazität	23.0 °C	371 - 418 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 371 - 418 J/(kg·K)	Typical for Wrought Copper Brass
Wärmeleitfähigkeit	20.0 °C	109 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 109 W/(m·K)

Elektrisch

Property	Temperature	Value
Elektrische Leitfähigkeit	20.0 °C	1.39E+7 S/m Show Material materials with Elektrische Leitfähigkeit of 1.39E+7 S/m
spezifischer Widerstand	20.0 °C	7.2E-8 Ω·m Show Material materials with spezifischer Widerstand of 7.2E-8 Ω·m

Chemical properties

Property	Value
Aluminium	0.05 % Show Material materials with Aluminium of 0.05 %
Blei	0.2 - 0.8 % Show Material materials with Blei of 0.2 - 0.8 %
Eisen	0.2 % Show Material materials with Eisen of 0.2 %
Kupfer	59 - 60.5 % Show Material materials with Kupfer of 59 - 60.5 %
Nickel	0.3 % Show Material materials with Nickel of 0.3 %
Zinn	0.2 % Show Material materials with Zinn of 0.2 %

Looking for suppliers of this material? Click to see 3 supplier of EN 1652 Grade CuZn39Pb0.5 R400 on Matmatch