EN 12163 Grade CuNi2Be F00

Want to keep this datasheet? Save it now in your required format

Description

CuNi2Be, mat. No CW110C, is counted among hardenable, low alloyed copper alloys. To the comparable make CuNi2Be, mat. No 2.0850, acc. to DIN 17666 : 1983-12 applies: The alloy shows high tensile strength and high temperature resistance and mean electrical and favorable thermal conductivity. Processing properties: hot and cold forming: good machinability: moderately hard and soft soldering: good gas shielded welding: good burnishing: good Application: For resistance welding electrodes as well as for springs. For the electrolytically tinned strip the coatings (Sn bright, Sn matt, Sn fuzed, SnPb) are listed by the application (better solderability, better corrosion resistance, reduction of the electrical contact resistance, better appearance) in the DIN EN 14436 : 2004-11 (Table 5)

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	20.0 °C	8.8 g/cm³ Show Material materials with Dichte of 8.8 g/cm³

Mechanisch

Property	Temperature	Value	Comment
Dehnung	20.0 °C	10 - 12 % Show Material materials with Dehnung of 10 - 12 %
Elastizitätsmodul	23.0 °C	110 - 130 GPa Show Material materials with Elastizitätsmodul of 110 - 130 GPa	Typical for Wrought Copper High Copper Alloy
Elongation A10	20.0 °C	8 % Show Material materials with Elongation A10 of 8 %
Elongation A100	20.0 °C	6 % Show Material materials with Elongation A100 of 6 %
Härte, Brinell	20.0 °C	190 - 220 [-] Show Material materials with Härte, Brinell of 190 - 220 [-]
Härte, Vickers	20.0 °C	200 - 230 [-] Show Material materials with Härte, Vickers of 200 - 230 [-]
Streckgrenze Rp 0,2	20.0 °C	500 - 635 MPa Show Material materials with Streckgrenze Rp 0,2 of 500 - 635 MPa
Zugfestigkeit	20.0 °C	650 - 900 MPa Show Material materials with Zugfestigkeit of 650 - 900 MPa

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	23.0 °C	1.6E-5 - 1.8E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.6E-5 - 1.8E-5 1/K	Typical for Wrought Copper High Copper Alloy
Schmelzpunkt		855 - 1090 °C Show Material materials with Schmelzpunkt of 855 - 1090 °C	Typical for Wrought Copper High Copper Alloy
Spezifische Wärmekapazität	23.0 °C	360 - 420 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 360 - 420 J/(kg·K)	Typical for Wrought Copper High Copper Alloy

Chemical properties

Property	Value
Beryllium	0.2 - 0.6 % Show Material materials with Beryllium of 0.2 - 0.6 %
Eisen	0.2 % Show Material materials with Eisen of 0.2 %
Kobalt	0.3 % Show Material materials with Kobalt of 0.3 %
Nickel	1.4 - 2.4 % Show Material materials with Nickel of 1.4 - 2.4 %

Looking for suppliers of this material? Click to see 2 supplier of EN 12163 Grade CuNi2Be F00 on Matmatch