EN 12163 Grade CuNi30Mn1Fe M

Want to keep this datasheet? Save it now in your required format

Description

CuNi30Mn1Fe (CW354H) is comparable to CuNi30Mn1Fe, mat. no. 2.0882, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by Ni, the electrical resistance strongly increases according to the Ni-content. Fe-addition increases the corrosion resistance. CuNi30Mn1Fe is resistant to water and seawater, coolant and solvent, alkaline substances, alkaline saline solutions and non-oxidizing acids. warm forming: good cold forming: good machinability: moderately hard soldering: very good soft soldering: very good gas-shielded welding: very good burnishing: good Application: For seawater pipilines, tubes and plates for all types of tubular heat-exchanger (condenser, cooler, seawater evaporators, high pressure feeder water heater) on ships, in power plants, in petroleum processing an in chemical factories as well as in saltern plants. The material is established for condenser in ammoniac steam.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

Properties of Copper

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	20.0 °C	8.9 g/cm³ Show Material materials with Dichte of 8.9 g/cm³

Mechanisch

Property	Temperature	Value	Comment
Elastizitätsmodul	23.0 °C	120 - 156 GPa Show Material materials with Elastizitätsmodul of 120 - 156 GPa	Typical for Wrought Copper Nickel Grade

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	23.0 °C	1.4E-5 - 1.8E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.4E-5 - 1.8E-5 1/K	Typical for Wrought Copper Nickel Grade
Schmelzpunkt		915 - 1240 °C Show Material materials with Schmelzpunkt of 915 - 1240 °C	Typical for Wrought Copper Nickel Grade
Spezifische Wärmekapazität	23.0 °C	375 - 398 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 375 - 398 J/(kg·K)	Typical for Wrought Copper Nickel Grade
Wärmeleitfähigkeit	23.0 °C	21 - 195 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 21 - 195 W/(m·K)	Typical for Wrought Copper Nickel Grade

Chemical properties

Property	Value
Blei	0.02 % Show Material materials with Blei of 0.02 %
Eisen	0.4 - 1 % Show Material materials with Eisen of 0.4 - 1 %
Kobalt	0.1 % Show Material materials with Kobalt of 0.1 %
Kohlenstoff	0.05 % Show Material materials with Kohlenstoff of 0.05 %
Mangan	0.5 - 1.5 % Show Material materials with Mangan of 0.5 - 1.5 %
Nickel	30 - 32 % Show Material materials with Nickel of 30 - 32 %
Phosphor	0.02 % Show Material materials with Phosphor of 0.02 %
Schwefel	0.05 % Show Material materials with Schwefel of 0.05 %
Zink	0.5 % Show Material materials with Zink of 0.5 %
Zinn	0.05 % Show Material materials with Zinn of 0.05 %

Looking for suppliers of this material? Click to see 4 supplier of EN 12163 Grade CuNi30Mn1Fe M on Matmatch