RENYCLE S T203K 3030 BK

Alternative und Handelsbezeichungen
PA6-I

Want to keep this datasheet? Save it now in your required format

Description

Partially recycled PA6 injection moulding grade. Toughened. Heat stabilized. Black colour.

This material has been developed to reduce its environmental impact compared to first-choice grades, through the recovery of post-consumer (end-of-life) components previously classified as waste.

Equivalent Materials

Diese Materialdaten wurden von Radici Group zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

HERSTELLER

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materialien von diesem Anbieter

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

Sehen Sie alle Materialen dieses Anbieters

Anwendungsfälle

Webinar: Metal Replacement with Engineering Polymers

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Dichte	1.12 g/cm³ Show Supplier Material materials with Dichte of 1.12 g/cm³	dry	ISO 1183

Mechanisch

Property	Temperature	Value	Condition	Testing Standard	Comment
Biegefestigkeit		30 MPa Show Supplier Material materials with Biegefestigkeit of 30 MPa	50%RH	ISO 178	2mm/min
		100 MPa Show Supplier Material materials with Biegefestigkeit of 100 MPa	dry	ISO 178	2mm/min
Biegemodul		0.72 GPa Show Supplier Material materials with Biegemodul of 0.72 GPa	50%RH	ISO 178	2mm/min
		2.5 GPa Show Supplier Material materials with Biegemodul of 2.5 GPa	dry	ISO 178	2mm/min
Dehnung		20 % Show Supplier Material materials with Dehnung of 20 %	dry	ISO 527-2/1A	min. \| 50mm/min \| nominal
Elastizitätsmodul		0.85 GPa Show Supplier Material materials with Elastizitätsmodul of 0.85 GPa	50%RH	ISO 527-2/1A	1mm/min
		2.5 GPa Show Supplier Material materials with Elastizitätsmodul of 2.5 GPa	dry	ISO 527-2/1A	1mm/min
Elongation at yield		230 % Show Supplier Material materials with Elongation at yield of 230 %	50%RH	ISO 527-2/1A	50mm/min
Schlagfestigkeit, Charpy gekerbt	23 °C	12.5 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 12.5 kJ/m²	dry	ISO 179/1eA
	23 °C	90 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 90 kJ/m²	50%RH	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt		No Break at 23°C	dry	ISO 179/1eU
Streckgrenze		35 MPa Show Supplier Material materials with Streckgrenze of 35 MPa	50%RH	ISO 527-2/1A	50mm/min
		65 MPa Show Supplier Material materials with Streckgrenze of 65 MPa	dry	ISO 527-2/1A	50mm/min

Thermisch

Property	Value	Testing Standard	Comment
Schmelzpunkt	220 °C Show Supplier Material materials with Schmelzpunkt of 220 °C	ISO 11357-1/-3	10°C/min
Wärmeformbeständigkeitstemperatur	60 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 60 °C	ISO 75/2Af	1.80 MPa

Rheological Properties

Property	Value	Testing Standard	Condition	Comment
Schmelzmassenflussrate	20 g/10min Show Supplier Material materials with Schmelzmassenflussrate of 20 g/10min	ISO 1133		250°C/2.16Kg
Schrumpfung	1.4 % Show Supplier Material materials with Schrumpfung of 1.4 %	ISO 294-4	250/80/60*	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]
	1.6 % Show Supplier Material materials with Schrumpfung of 1.6 %	ISO 294-4	250/80/60*	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse

Technological properties

Property
Additives	Release agent
Certifications	RoHS 2011/65/UE
Color	Black
Features	Impact Modified, Heat Stabilized
Processing methods	Injection Molding