Eigenschaften
Allgemein
Mechanisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Biegefestigkeit | 23.0 °C | 74 MPa Show Supplier Material materials with Biegefestigkeit of 74 MPa | ASTM D 790 |
Biegemodul | 23.0 °C | 1.9 GPa Show Supplier Material materials with Biegemodul of 1.9 GPa | ASTM D 790 |
Dehnung | 23.0 °C | 150 % Show Supplier Material materials with Dehnung of 150 % | SABIC - Japan Method | break |
Impact strength, Izod notched, ASTM | 23.0 °C | 843 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 843 J/m | ASTM D 256 | notched, 23°C |
Schlagzähigkeit, Izod gekerbt | 23.0 °C | 843 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 843 kJ/m² | ASTM D 256 | notched, 23°C |
Zugfestigkeit | 23.0 °C | 45 MPa Show Supplier Material materials with Zugfestigkeit of 45 MPa | SABIC - Japan Method | yield |
Thermisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Heat deflection temperature, 0.45 MPa | 180 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 180 °C | ASTM D 648 | 3.2 mm, unannealed | |
Koeffizient der thermischen Ausdehnung | 23.0 °C | 8E-5 - 1E-4 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 8E-5 - 1E-4 1/K | TMA | -30°C to 30°C |
Wärmeformbeständigkeitstemperatur | 180 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 180 °C |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Schrumpfung | 23.0 °C | 1.1 % Show Supplier Material materials with Schrumpfung of 1.1 % | SABIC method | 3.2 mm |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Motorcycle, Head Protection, Exterior Trim | |
| Availability | Asia | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |