LNP™ STAT-KON™ Compound ME003S - Asia

Want to keep this datasheet? Save it now in your required format

Description

LNP STAT-KON ME003S is a compound based on Polypropylene resin containing 15% Carbon Fiber. Added features of this material include: Electrically Conductive, Heat Stabilized.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Anwendungen

Elektrotechnik

Bau

Water Management

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	62 MPa Show Supplier Material materials with Biegefestigkeit of 62 MPa	ISO 178
Biegemodul	23.0 °C	7 GPa Show Supplier Material materials with Biegemodul of 7 GPa	ISO 178
Dehnung	23.0 °C	1 % Show Supplier Material materials with Dehnung of 1 %	ISO 527 \| break
Impact strength, Izod notched, ASTM	23.0 °C	53 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 53 J/m	ASTM D 256 \| notched, 23°C
Impact strength, Izod unnotched, ASTM	23.0 °C	128 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 128 J/m	ASTM D 4812 \| 23°C
Schlagzähigkeit, Izod gekerbt	23.0 °C	1 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 1 kJ/m²	ISO 180/1A \| 80104, 23°C
Zugfestigkeit	23.0 °C	44 MPa Show Supplier Material materials with Zugfestigkeit of 44 MPa	ISO 527 \| break

Elektrisch

Property	Temperature	Value	Comment
Sheet resistivity, ROA	23.0 °C	1000 - 1000000 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1000 - 1000000 Ω	ASTM D 257

Technological properties

Property
Application areas	Pump, Oil/Gas, Enclosures
Availability	Asia,Americas
Processing methods	Drying Temperature: 80°C Mold Temperature: 30 to 50.0°C Back Pressure: 0.2 to 0.3MPa Melt Temperature: 225 to 250.0°C Middle - Zone 2 Temperature: 215 to 225.0°C Screw Speed: 30 to 60.0rpm Front - Zone 3 Temperature: 240 to 250.0°C Drying Time: 4hrs Rear - Zone 1 Temperature: 195 to 205.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.