PPE reactive chemistries SA9000

Want to keep this datasheet? Save it now in your required format

Description

NORYL SA9000 resin is a modified, low molecular weight, bi-functional oligomer based on polyphenylene ether (PPE) with vinyl end-groups. It is well suited for use with other unsaturated monomers and resins which cure via free radical reactions. These include styrenic, allylic, acrylic, maleimide, methacrylic, and unsaturated polyesters monomers and resins. It has a low solution viscosity and outstanding solubility in toluene & methyl ethyl ketone (MEK). Key application areas are in electronic packaging which include PCB laminates, copper clad laminates, non-epoxy prepregs, and adhesives. The use of NORYL SA9000 is especially advantageous in insulating materials where very low dielectric properties and decreased moisture absorption are required.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Anwendungen

Herstellung

Additive Fertigung

Elektronik

Anzeigegeräte

Verbundwerkstoffindustrie

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Relative Dichte	23.0 °C	1.02 [-] Show Supplier Material materials with Relative Dichte of 1.02 [-]	ASTM D 792

Thermisch

Property	Value	Comment
Glasübergangstemperatur	160 °C Show Supplier Material materials with Glasübergangstemperatur of 160 °C	SABIC method \| (half width)

Elektrisch

Property	Temperature	Value	Comment
Dielektrizitätskonstante, 1 MHz	23.0 °C	2.54 [-] Show Supplier Material materials with Dielektrizitätskonstante, 1 MHz of 2.54 [-]	ASTM D 150
Dissipation factor, 1MHz	23.0 °C	7E-4 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 7E-4 [-]	ASTM D 150 \|

Rheological Properties

Property	Temperature	Value	Comment
Viskosität	23.0 °C	0.16 Pa·s Show Supplier Material materials with Viskosität of 0.16 Pa·s	SABIC method \| 50 wt% in methyl ethyl ketone, 25°C

Technological properties

Property
Application areas	Electronic Material, Electronic Material Handling, Additive Plastic, Composite, Circuit Board, Data Transfer
Availability	Europe,Asia,Americas
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.