Allgemein
Property | Temperature | Value | Comment |
---|---|---|---|
Dichte | 23.0 °C | 1.03 g/cm³ Show Supplier Material materials with Dichte of 1.03 g/cm³ | ISO 1183 |
Moisture absorption | 23.0 °C | 0.05 % Show Supplier Material materials with Moisture absorption of 0.05 % | ISO 62 | (23°C / 50% RH) |
Relative Dichte | 23.0 °C | 1.03 [-] Show Supplier Material materials with Relative Dichte of 1.03 [-] | ASTM D 792 |
Wasserabsorption | 23.0 °C | 0.12 % Show Supplier Material materials with Wasserabsorption of 0.12 % | ISO 62-1 | (23°C/saturated) |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Biegefestigkeit | 23.0 °C | 59 MPa Show Supplier Material materials with Biegefestigkeit of 59 MPa | ISO 178 | yield, 2 mm/min |
Biegemodul | 23.0 °C | 1.7 GPa Show Supplier Material materials with Biegemodul of 1.7 GPa | ISO 178 | 2 mm/min |
Dehnung | 23.0 °C | 46 % Show Supplier Material materials with Dehnung of 46 % | ISO 527 | break, 50 mm/min |
Elastizitätsmodul | 23.0 °C | 1.8 GPa Show Supplier Material materials with Elastizitätsmodul of 1.8 GPa | ISO 527 | 1 mm/min |
Impact strength, Izod notched, ASTM | 23.0 °C | 309 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 309 J/m | ASTM D 256 |
Instrumented Impact, Total Energy | 23.0 °C | 45 J Show Supplier Material materials with Instrumented Impact, Total Energy of 45 J | ASTM D 3763 | 23°C |
Schlagfestigkeit, Charpy gekerbt | 23.0 °C | 33 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 33 kJ/m² | ISO 179/1eA | V-notch Edgew, 23°C, 80*10*4 sp=62mm |
Schlagzähigkeit, Izod gekerbt | 23.0 °C | 6 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 6 kJ/m² | ISO 180/1A | 80*10*4, -30°C |
Zugfestigkeit | 23.0 °C | 44 MPa Show Supplier Material materials with Zugfestigkeit of 44 MPa | ISO 527 | yield, 50 mm/min |
Thermisch
Property | Temperature | Value | Comment |
---|---|---|---|
Heat deflection temperature, 1.80 MPa | 98 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 98 °C | ISO 75/Af | Flatw 80*10*4 sp=64mm | |
Koeffizient der thermischen Ausdehnung | 23.0 °C | 8.4E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 8.4E-5 1/K | ISO 11359-2 | -40°C to 40°C |
Vicat-Erweichungstemperatur | 117 °C Show Supplier Material materials with Vicat-Erweichungstemperatur of 117 °C | ISO 306 | Rate B/120 | |
Wärmeformbeständigkeitstemperatur | 98 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 98 °C | ||
thermischer Ausdehnungskoeffizient, transversal | 23.0 °C | 1.11E-4 1/K Show Supplier Material materials with thermischer Ausdehnungskoeffizient, transversal of 1.11E-4 1/K | ISO 11359-2 | -40°C to 40°C |
Rheological Properties
Property | Value | Comment |
---|---|---|
Schmelzmassenflussrate | 13.8 g/10min Show Supplier Material materials with Schmelzmassenflussrate of 13.8 g/10min | ASTM D 1238 | 280°C/5.0 kgf |
Schmelzvolumenflussrate | 13 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 13 cm³/10min | ISO 1133 | MVR at 280°C/5.0 kg |
Technological properties
Property | ||
---|---|---|
Application areas | Auto Electrical, Auto Aftermarket, Wire & cable | |
Availability | Europe,Asia,Americas | |
Processing methods | Head Zone Temperature: 250 to 285.0°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |