LNP™ COLORCOMP™ Compound NX05467

Want to keep this datasheet? Save it now in your required format

Description

LNP COLORCOMP NX05467 is an unfilled Polycarbonate+ABS (PC+ABS) resin. Added features of this material is: Non-Chlorinated, non-Brominated Flame Retardant with UL V0, 5VB and 5VA flame rating.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyTemperatureValueComment

Relative Dichte

23.0 °C

1.18 [-]

Show Supplier Material materials with Relative Dichte of 1.18 [-]

ASTM D 792

Mechanisch

PropertyTemperatureValueComment

Biegefestigkeit

23.0 °C

103 MPa

Show Supplier Material materials with Biegefestigkeit of 103 MPa

ASTM D 790

Biegemodul

23.0 °C

2.7 GPa

Show Supplier Material materials with Biegemodul of 2.7 GPa

ASTM D 790

Dehnung

23.0 °C

50 %

Show Supplier Material materials with Dehnung of 50 %

ASTM D 638 | break

Zugfestigkeit

23.0 °C

66 MPa

Show Supplier Material materials with Zugfestigkeit of 66 MPa

ASTM D 638 | yield

Thermisch

PropertyValueComment

Relative temperature index, electrical

85 °C

Show Supplier Material materials with Relative temperature index, electrical of 85 °C

UL 746B

Relative temperature index, mechanical impact

85 °C

Show Supplier Material materials with Relative temperature index, mechanical impact of 85 °C

UL 746B

Relative temperature index, mechanical strength

85 °C

Show Supplier Material materials with Relative temperature index, mechanical strength of 85 °C

UL 746B

Entflammbarkeit

UL Recognized, 94HB Flame Class Rating: ≥0.7mm UL 94 <br> UL Recognized, 94V-1 Flame Class Rating: ≥1.2mm UL 94 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1.5mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥3.4mm UL 94 <br> UL Recognized, 94-5VB Flame Class Rating: ≥2.0mm UL 94 <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=104340779- -

Elektrisch

PropertyTemperatureValueComment

Dielectric constant, 60Hz

23.0 °C

2.8 [-]

Show Supplier Material materials with Dielectric constant, 60Hz of 2.8 [-]

IEC 60250

Dielektrizitätskonstante, 1 MHz

23.0 °C

2.7 [-]

Show Supplier Material materials with Dielektrizitätskonstante, 1 MHz of 2.7 [-]

IEC 60250

Dissipation factor, 1MHz

23.0 °C

8E-3 [-]

Show Supplier Material materials with Dissipation factor, 1MHz of 8E-3 [-]

IEC 60250

Dissipation factor, 50Hz

23.0 °C

4E-3 [-]

Show Supplier Material materials with Dissipation factor, 50Hz of 4E-3 [-]

IEC 60250 | 50/60 Hz

Durchschlagfestigkeit

23.0 °C

430 kV/mm

Show Supplier Material materials with Durchschlagfestigkeit of 430 kV/mm

IEC 60243-1 | in oil, 3.2 mm,

High Amp Arc Ignition

23.0 °C

1.5 mm

Show Supplier Material materials with High Amp Arc Ignition of 1.5 mm

≥, UL 746A | PLC 0

High Volt Arc Track Rate

23.0 °C

2 PLC Code

Show Supplier Material materials with High Volt Arc Track Rate of 2 PLC Code

UL 746A | (PLC)

Hot-Wire Ignition

23.0 °C

3 mm

Show Supplier Material materials with Hot-Wire Ignition of 3 mm

≥, UL 746A | PLC 2

Kriechstromfestigkeit

23.0 °C

2 V

Show Supplier Material materials with Kriechstromfestigkeit of 2 V

UL 746A | (UL) {PLC}

Sheet resistivity, ROA

23.0 °C

1.00E+15 Ω

Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+15 Ω

ASTM D 257

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Supplier Material materials with Volume resistivity of 1.00E+15 Ω·cm

ASTM D 257

Rheological Properties

PropertyTemperatureValueComment

Schmelzmassenflussrate

17 g/10min

Show Supplier Material materials with Schmelzmassenflussrate of 17 g/10min

ASTM D 1238 | 260°C/2.16 kgf

Schrumpfung

23.0 °C

0.4 %

Show Supplier Material materials with Schrumpfung of 0.4 %

SABIC method

Schrumpfung, diagonal

23.0 °C

0.4 %

Show Supplier Material materials with Schrumpfung, diagonal of 0.4 %

SABIC method

Technological properties

Property
Application areas

Medical Facility Infrastructure

Availability

Europe,Asia,Americas

Processing methods

Drying Temperature: 80 to 90.0°C
Drying Time: 3 to 4.0hrs
Drying Time (Cumulative): 8hrs
Maximum Moisture Content: 0.04%
Melt Temperature: 245 to 275.0°C
Nozzle Temperature: 245 to 275.0°C
Front - Zone 3 Temperature: 245 to 275.0°C
Middle - Zone 2 Temperature: 220 to 265.0°C
Rear - Zone 1 Temperature: 220 to 255.0°C
Mold Temperature: 60 to 80.0°C
Back Pressure: 0.3 to 0.7MPa
Screw Speed: 40 to 70.0rpm
Shot to Cylinder Size: 30 to 80.0%
Vent Depth: 0.038 to 0.076mm

Supplier Disclaimer

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.