NORYL™ Resin V0150B - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ V0150B resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. exhibits good low temperature impact resistance, damp heat performance, low moisture absorption and good dimensional stability. NORYL V0150B resin is an excellent candidate for parts that are exposed to tough outdoor environments, such as Solar / Photovoltaic (PV) junction boxes and outdoor housings and enclosures.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Anwendungen

Elektrotechnik

Elektronik

Anzeigegeräte

Bau

Beleuchtung

Water Management

Verteidigung

Konsumgüter

Haushaltselektrogeräte

General Appliances

Alle anzeigen

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.11 g/cm³ Show Supplier Material materials with Dichte of 1.11 g/cm³	ISO 1183
Moisture absorption	23.0 °C	0.06 % Show Supplier Material materials with Moisture absorption of 0.06 %	ISO 62 \| (23°C / 50% RH)
Relative Dichte	23.0 °C	1.11 [-] Show Supplier Material materials with Relative Dichte of 1.11 [-]	ASTM D 792
Sauerstoffindex	23.0 °C	32 % Show Supplier Material materials with Sauerstoffindex of 32 %
Wasserabsorption	23.0 °C	0.18 % Show Supplier Material materials with Wasserabsorption of 0.18 %	ISO 62-1 \| (23°C/saturated)

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	110 MPa Show Supplier Material materials with Biegefestigkeit of 110 MPa	ISO 178 \| yield, 2 mm/min
Biegemodul	23.0 °C	2.4 GPa Show Supplier Material materials with Biegemodul of 2.4 GPa	ISO 178 \| 2 mm/min
Dehnung	23.0 °C	10 % Show Supplier Material materials with Dehnung of 10 %	ISO 527 \| break, 50 mm/min
Elastizitätsmodul	23.0 °C	2.5 GPa Show Supplier Material materials with Elastizitätsmodul of 2.5 GPa	ISO 527 \| 1 mm/min
Hardness, Ball Indentation	23.0 °C	113 MPa Show Supplier Material materials with Hardness, Ball Indentation of 113 MPa	ISO 2039-1 \| H358/30
Impact strength, Izod notched, ASTM	23.0 °C	180 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 180 J/m	ASTM D 256 \| notched, -30°C
Instrumented Impact, Total Energy	23.0 °C	50 J Show Supplier Material materials with Instrumented Impact, Total Energy of 50 J	ASTM D 3763 \| 23°C
Schlagfestigkeit, Charpy gekerbt	23.0 °C	14 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 14 kJ/m²	ISO 179/1eA \| V-notch Edgew, 23°C, 80104 sp=62mm
Schlagzähigkeit, Izod gekerbt	23.0 °C	5 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 5 kJ/m²	ISO 180/1A \| notched 80104, -30°C
Taber Abrasion	23.0 °C	35 mg/1000cy Show Supplier Material materials with Taber Abrasion of 35 mg/1000cy	SABIC method \| CS-17, 1 kg
Zugfestigkeit	23.0 °C	55 MPa Show Supplier Material materials with Zugfestigkeit of 55 MPa	ISO 527 \| break, 50 mm/min

Thermisch

Property	Temperature	Value	Comment
Ball pressure temperature		140 °C Show Supplier Material materials with Ball pressure temperature of 140 °C	IEC 60695-10-2 \| approximate maximum
Glow Wire Flammability Index		960 °C Show Supplier Material materials with Glow Wire Flammability Index of 960 °C
Glow Wire Ignition Temperature		775 °C Show Supplier Material materials with Glow Wire Ignition Temperature of 775 °C	IEC 60695-2-13 \| 3.0 mm
Heat deflection temperature, 0.45 MPa		140 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 140 °C	ISO 75/Be \| Edgew 120104 sp=100mm
Heat deflection temperature, 1.80 MPa		130 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 130 °C	ISO 75/Ae \| Edgew 120104 sp=100mm
Koeffizient der thermischen Ausdehnung	23.0 °C	7E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 7E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Relative temperature index, electrical		110 °C Show Supplier Material materials with Relative temperature index, electrical of 110 °C	UL 746B
Relative temperature index, mechanical impact		105 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 105 °C	UL 746B
Relative temperature index, mechanical strength		115 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 115 °C	UL 746B
Vicat-Erweichungstemperatur		155 °C Show Supplier Material materials with Vicat-Erweichungstemperatur of 155 °C	ISO 306 \| Rate B/120
Wärmeformbeständigkeitstemperatur		130 - 140 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 130 - 140 °C
Wärmeleitfähigkeit	23.0 °C	0.27 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 0.27 W/(m·K)	ISO 8302
thermischer Ausdehnungskoeffizient, transversal	23.0 °C	9E-5 1/K Show Supplier Material materials with thermischer Ausdehnungskoeffizient, transversal of 9E-5 1/K	ISO 11359-2 \| 23°C to 80°C
Entflammbarkeit	Glow Wire Ignitability Temperature, 1.0 mm: 775°C IEC 60695-2-13 <br> UL Recognized, 94V-0 Flame Class Rating: ≥1mm UL 94 <br> UL Recognized, 94-5VA Flame Class Rating: ≥2mm UL 94 <br> Glow Wire Flammability Index, 1.0 mm: 960°C IEC 60695-2-12 <br> Glow Wire Flammability Index, 1.5 mm: 960°C IEC 60695-2-12 <br> Glow Wire Ignitability Temperature, 1.5 mm: 775°C IEC 60695-2-13 <br> UL Recognized, 94V-1 Flame Class Rating: ≥0.8mm UL 94 <br> UV-light, water exposure/immersion: F1- UL 746C <br> UL Yellow Card Link: https://iq.ul.com/ul/cert.aspx?ULID=100727518- - <br> UL Yellow Card Link 2: https://iq.ul.com/ul/cert.aspx?ULID=100727519- -

Elektrisch

Property	Temperature	Value	Comment
Dielectric constant, 60Hz	23.0 °C	2.8 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.8 [-]	IEC 60250 \| 50/60 Hz
Dielektrizitätskonstante, 1 MHz	23.0 °C	2.7 [-] Show Supplier Material materials with Dielektrizitätskonstante, 1 MHz of 2.7 [-]	IEC 60250
Dissipation factor, 1MHz	23.0 °C	3E-3 [-] Show Supplier Material materials with Dissipation factor, 1MHz of 3E-3 [-]	IEC 60250
Dissipation factor, 50Hz	23.0 °C	9E-4 [-] Show Supplier Material materials with Dissipation factor, 50Hz of 9E-4 [-]	IEC 60250 \| 50/60 Hz
Durchschlagfestigkeit	23.0 °C	16 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 16 kV/mm	IEC 60243-1 \| in oil, 3.2 mm,
High Amp Arc Ignition	23.0 °C	0.8 mm Show Supplier Material materials with High Amp Arc Ignition of 0.8 mm	≥, UL 746A \| PLC 0
High Volt Arc Track Rate	23.0 °C	4 PLC Code Show Supplier Material materials with High Volt Arc Track Rate of 4 PLC Code	UL 746A \| (PLC)
Hot-Wire Ignition	23.0 °C	0.8 mm Show Supplier Material materials with Hot-Wire Ignition of 0.8 mm	≥, UL 746A \| PLC 0
Kriechstromfestigkeit	23.0 °C	2 V Show Supplier Material materials with Kriechstromfestigkeit of 2 V	UL 746A \| (UL) {PLC}
Sheet resistivity, ROA	23.0 °C	1.00E+15 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+15 Ω	>, IEC 60093
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Supplier Material materials with Volume resistivity of 1.00E+15 Ω·cm	IEC 60093 \|

Rheological Properties

Property	Temperature	Value	Comment
Schmelzmassenflussrate		3.5 g/10min Show Supplier Material materials with Schmelzmassenflussrate of 3.5 g/10min	ASTM D 1238 \| 280°C/5.0 kgf
Schmelzvolumenflussrate		10 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 10 cm³/10min	ISO 1133 \| MVR at 300°C/5.0 kg
Schrumpfung	23.0 °C	0.5 % Show Supplier Material materials with Schrumpfung of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Pump, Photovoltaic Components, Plumbing, Non-LED Lighting, Personal Computing, Infrastructure, Medical Device, LED Lighting, Washing Machine, Wiring Devices, Wireless Communications, Coffee Maker/Espresso Machine, Document Handling, Dishwasher, Circuit Protection, Amusement Machine, Enclosure/Housing/Cover, Electronics, Energy Management, Enclosures, Electronic Components
Availability	Europe,Asia,Americas
Processing methods	Hopper Temperature: 80 to 100.0°C Mold Temperature: 100 to 130.0°C Drying Temperature: 110 to 120.0°C Drying Time: 2 to 3.0hrs Front - Zone 3 Temperature: 300 to 320.0°C Rear - Zone 1 Temperature: 260 to 280.0°C Melt Temperature: 300 to 320.0°C Nozzle Temperature: 280 to 300.0°C Middle - Zone 2 Temperature: 280 to 300.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.