NORYL™ Resin EN95 - Asia

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ EN95 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This low heat extrusion grade exhibits low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Relative Dichte	23.0 °C	1.06 [-] Show Supplier Material materials with Relative Dichte of 1.06 [-]	ASTM D 792 \|

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	75 MPa Show Supplier Material materials with Biegefestigkeit of 75 MPa	ASTM D 790 \| yld, 1.3 mm/min, 50 mm span
Biegemodul	23.0 °C	2.3 GPa Show Supplier Material materials with Biegemodul of 2.3 GPa	ASTM D 790 \| 1.3 mm/min, 50 mm span
Dehnung	23.0 °C	50 % Show Supplier Material materials with Dehnung of 50 %	ASTM D 638 \| brk, Type I, 50 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	277 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 277 J/m	ASTM D 256 \| notched, 23°C
Schlagzähigkeit, Izod gekerbt	23.0 °C	277 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 277 kJ/m²	ASTM D 256 \| notched, 23°C
Zugfestigkeit	23.0 °C	45 MPa Show Supplier Material materials with Zugfestigkeit of 45 MPa	ASTM D 638 \| yld, Type I, 50 mm/min

Thermisch

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	100 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 100 °C	ASTM D 648 \| 3.2mm, unannealed
Wärmeformbeständigkeitstemperatur	100 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 100 °C

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.5 % Show Supplier Material materials with Schrumpfung of 0.5 %	SABIC method \| 3.2 mm

Technological properties

Property
Availability	Asia
Processing methods	Drying Time (Cumulative): 8hrs Melt Temperature: 210 to 230.0°C Drying Temperature: 100 to 105.0°C Drying Time: 2 to 4.0hrs
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.