ULTEM™ Resin 1000 - Americas

Additive Plastic, Air Cabin Interiors, Aircraft Seating, Aerospace, Auto Electrical, Circuit Protection, Auto Aftermarket, Audio, Amusement Machine, Animal Testing, Aircraft Exteriors, Defense Vehicles, Displays, Document Handling, Cooking Range, Composite, Commercial Storage/Cookware, Coffee Maker/Espresso Machine, Building Element, Data Management, Data Transfer, Forward Lighting, Food Transportation, Eyeglasses, Furnace/Heater, Fluid Delivery, Food Processor, Fog Lamp, Food Container, Exterior, Electronic Material Handling, Engine Component, Infotainment/Telematic, Industrial Material Handling, Individual Equiptment, Lab Ware and Clinical Diagnostics, Heavy Vehicles, Head Protection, Gear/Bearing/Slider, Enclosures, Enclosure/Housing/Cover, Energy Management, Electronics, Electronic Components, Pharmaceutical Manufacturing, Photo/Video Camera, Pharmaceutical Packaging & Drug Delivery, Power Manangement, Plumbing, Photovoltaic Components, Recreational Vehicle, Refrigerator, Pipe/Fitting, Pump, Rear/Signal Lighting, Rail, Safety Glasses, Respiratory, Security/Detection, Semiconductor, Small Appliance, Sanitary, Servingware, Sensor, Surgical Devices, Personal Care, OLED, Oil/Gas, Non-LED Lighting, Personal Computing, Monitoring and Imaging, Microwave Oven, Meter Gas, Infrastructure, Interior Rail Components, Inverter, Medical Facility Infrastructure, LED Lighting, Medical Device, Wiring Devices, Weapon, Water Treatment/Filtration, Wearables, Wireless Communications, Swimming Pool/Spa, Sunglasses, Surgical Tray, Tray, Vending Machine, Underhood, Washing Machine, Wire & cable, Irrigation

Europe,Asia,Americas

Middle - Zone 2 Temperature: 340 to 400.0°C
Drying Temperature: 140 to 150.0°C
Adapter - Zone 5 Temperature: 330 to 355.0°C
Nozzle Temperature: 345 to 400.0°C
Head - Zone 6 - Top Temperature: 330 to 355.0°C
Drying Temperature: 150°C
Barrel - Zone 3 Temperature: 330 to 355.0°C
Melt Temperature: 350 to 400.0°C
Drying Time (Cumulative): 24hrs
Front - Zone 3 Temperature: 345 to 400.0°C
Maximum Moisture Content: 0.02%
Shot to Cylinder Size: 40 to 60.0%
Melt Temperature (Parison): 320 to 355.0°C
Rear - Zone 1 Temperature: 330 to 400.0°C
Barrel - Zone 2 Temperature: 330 to 355.0°C
Back Pressure: 0.3 to 0.7MPa
Screw Speed: 40 to 70.0rpm
Drying Time: 4 to 6.0hrs
Barrel - Zone 1 Temperature: 325 to 350.0°C
Die Temperature: 325 to 355.0°C
Barrel - Zone 4 Temperature: 330 to 355.0°C
Maximum Moisture Content: 0.01 to 0.02%
Vent Depth: 0.025 to 0.076mm
Mold Temperature: 135 to 165.0°C
Screw Speed: 10 to 70.0rpm
Mold Temperature: 65 to 175.0°C
Drying Time: 4 to 6.0hrs
Head - Zone 7 - Bottom Temperature: 330 to 355.0°C
Drying Time (Cumulative): 24hrs

While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.