LNP™ THERMOCOMP™ Compound MX95319

Want to keep this datasheet? Save it now in your required format

Description

LNP THERMOCOMP MX95319 is a compound based on Polypropylene resin containing Proprietary Filler(s).

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.04 g/cm³ Show Supplier Material materials with Dichte of 1.04 g/cm³	ASTM D 792

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	103 MPa Show Supplier Material materials with Biegefestigkeit of 103 MPa	ASTM D 790
Biegemodul	23.0 °C	4.1 GPa Show Supplier Material materials with Biegemodul of 4.1 GPa	ASTM D 790
Dehnung	23.0 °C	3.1 % Show Supplier Material materials with Dehnung of 3.1 %	ASTM D 638 \| break
Impact strength, Izod notched, ASTM	23.0 °C	42 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 42 J/m	ASTM D 256
Impact strength, Izod unnotched, ASTM	23.0 °C	534 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 534 J/m	ASTM D 4812 \| 23°C
Schlagzähigkeit, Izod gekerbt	23.0 °C	42 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 42 kJ/m²	ASTM D 256 \| notched, 23°C
Zugfestigkeit	23.0 °C	66 MPa Show Supplier Material materials with Zugfestigkeit of 66 MPa	ASTM D 638 \| break

Thermisch

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	145 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 145 °C	ASTM D 648 \| 3.2mm, unannealed
Wärmeformbeständigkeitstemperatur	145 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 145 °C

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.4 % Show Supplier Material materials with Schrumpfung of 0.4 %	ASTM D 955 \| 24 hrs
Schrumpfung, diagonal	23.0 °C	1 % Show Supplier Material materials with Schrumpfung, diagonal of 1 %	ASTM D 955 \| 24 hrs

Technological properties

Property
Availability	Europe,Asia,Americas
Processing methods	Drying Temperature: 80°C Drying Time: 4hrs Melt Temperature: 225 to 250.0°C Front - Zone 3 Temperature: 240 to 250.0°C Middle - Zone 2 Temperature: 215 to 225.0°C Rear - Zone 1 Temperature: 195 to 205.0°C Mold Temperature: 30 to 50.0°C Back Pressure: 0.2 to 0.3MPa Screw Speed: 30 to 60.0rpm
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.