NORYL™ Resin FE1740PW - Americas

Want to keep this datasheet? Save it now in your required format

Description

NORYL™ FE1740PW resin is a 40% glass reinforced blend of polyphenylene ether (PPE) + crystal clear polystyrene (ccPS). This injection moldable material is FC EU, FDA food contact compliant, NSF/ANSI 61*, ACS, WRAS, KTW, and W270 listed for global potable water use. NORYL FE1740PW resin exhibits excellent long-term hydrolytic stability, very low moisture absorption, heat / hot water resistance and is an excellent candidate for a variety of water management applications such as pump housings, impellers, shower/faucet, membrane housings and valves. *NSF certification is color dependent.

Diese Materialdaten wurden von Sabic zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

SABIC

MANUFACTURER, PROCESSOR AND DISTRIBUTOR

Additional services:

Our six Global Application Technology development hubs add value to our customers’ entire product development cycles in a wide range of industries. We provide our customers with advanced design, predictive engineering, testing, validation and processing services. Our COLORXPRESS™ services team provides global color matching and maintenance. Our Fast Formulation services provide initial assessments within five business days and custom-made samples typically in four to six weeks.

Anwendungen

Bau

Water Management

Materialien von diesem Anbieter

LNP™ THERMOCOMP™ Compound WF006H

LNP™ THERMOCOMP™ Compound PF00C - Europe

LNP™ THERMOCOMP™ Compound JF006E - Europe

LEXAN™ Copolymer FXE1414T - Americas

LNP™ ELCRES™ CRX9411

Sehen Sie alle Materialen dieses Anbieters

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.4 g/cm³ Show Supplier Material materials with Dichte of 1.4 g/cm³	ISO 1183
Moisture absorption	23.0 °C	0.06 % Show Supplier Material materials with Moisture absorption of 0.06 %	ISO 62 \| (23°C / 50% RH)
Relative Dichte	23.0 °C	1.4 [-] Show Supplier Material materials with Relative Dichte of 1.4 [-]	ASTM D 792 \|
Wasserabsorption	23.0 °C	0.2 % Show Supplier Material materials with Wasserabsorption of 0.2 %	ISO 62-1 \| (23°C/saturated)

Mechanisch

Property	Temperature	Value	Comment
Biegefestigkeit	23.0 °C	195 MPa Show Supplier Material materials with Biegefestigkeit of 195 MPa	ISO 178 \| break, 2 mm/min
Biegemodul	23.0 °C	9.5 GPa Show Supplier Material materials with Biegemodul of 9.5 GPa	ISO 178 \| 2 mm/min
Dehnung	23.0 °C	1.8 % Show Supplier Material materials with Dehnung of 1.8 %	ISO 527 \| break, 5 mm/min
Elastizitätsmodul	23.0 °C	11.3 GPa Show Supplier Material materials with Elastizitätsmodul of 11.3 GPa	ISO 527 \| 1 mm/min
Impact strength, Izod notched, ASTM	23.0 °C	108 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 108 J/m	ASTM D 256
Instrumented Impact, Total Energy	23.0 °C	18 J Show Supplier Material materials with Instrumented Impact, Total Energy of 18 J	ASTM D 3763 \| 23°C
Schlagzähigkeit, Izod gekerbt	23.0 °C	108 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 108 kJ/m²	ASTM D 256 \| notched, 23°C
Schlagzähigkeit, Izod ungekerbt	23.0 °C	30 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod ungekerbt of 30 kJ/m²	ISO 180/1U \| unnotched 80104, -30°C
Zugfestigkeit	23.0 °C	155 MPa Show Supplier Material materials with Zugfestigkeit of 155 MPa	ISO 527 \| break, 5 mm/min

Thermisch

Property	Temperature	Value	Comment
Heat deflection temperature, 1.80 MPa		147 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 147 °C	ISO 75/Af \| Flatw 80104 sp=64mm
Koeffizient der thermischen Ausdehnung	23.0 °C	2E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 2E-5 1/K	ISO 11359-2 \| -40°C to 40°C
Vicat-Erweichungstemperatur		152 °C Show Supplier Material materials with Vicat-Erweichungstemperatur of 152 °C	ISO 306 \| Rate B/50
Wärmeformbeständigkeitstemperatur		147 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 147 °C
thermischer Ausdehnungskoeffizient, transversal	23.0 °C	7E-5 1/K Show Supplier Material materials with thermischer Ausdehnungskoeffizient, transversal of 7E-5 1/K	ISO 11359-2 \| -40°C to 40°C

Rheological Properties

Property	Temperature	Value	Comment
Schmelzmassenflussrate		10 g/10min Show Supplier Material materials with Schmelzmassenflussrate of 10 g/10min	ASTM D 1238 \| 300°C/5.0 kgf
Schmelzvolumenflussrate		20 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 20 cm³/10min	ISO 1133 \| MVR at 300°C/10.0 kg
Schrumpfung	23.0 °C	0.09 % Show Supplier Material materials with Schrumpfung of 0.09 %	SABIC method \| 3.2 mm

Technological properties

Property
Application areas	Pump, Pipe/Fitting
Availability	Europe,Asia,Americas
Processing methods	Middle - Zone 2 Temperature: 270 to 290.0°C Mold Temperature: 80 to 120.0°C Rear - Zone 1 Temperature: 250 to 270.0°C Front - Zone 3 Temperature: 290 to 310.0°C Drying Temperature: 100 to 120.0°C Nozzle Temperature: 280 to 300.0°C Melt Temperature: 280 to 300.0°C Maximum Moisture Content: 0.02% Drying Time: 2 to 4.0hrs Hopper Temperature: 60 to 80.0°C
Supplier Disclaimer	While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.