Eigenschaften
Allgemein
Mechanisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Biegefestigkeit | 23.0 °C | 159 MPa Show Supplier Material materials with Biegefestigkeit of 159 MPa | ASTM D 790 |
Biegemodul | 23.0 °C | 7.4 GPa Show Supplier Material materials with Biegemodul of 7.4 GPa | ASTM D 790 |
Dehnung | 23.0 °C | 8 - 10 % Show Supplier Material materials with Dehnung of 8 - 10 % | SABIC - Japan Method | break |
Hardness, Rockwell R | 23.0 °C | 121 [-] Show Supplier Material materials with Hardness, Rockwell R of 121 [-] | ASTM D 785 |
Impact strength, Izod notched, ASTM | 23.0 °C | 127 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 127 J/m | ASTM D 256 |
Schlagzähigkeit, Izod gekerbt | 23.0 °C | 127 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 127 kJ/m² | ASTM D 256 | notched, 23°C |
Zugfestigkeit | 23.0 °C | 117 MPa Show Supplier Material materials with Zugfestigkeit of 117 MPa | SABIC - Japan Method | yield |
Thermisch
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Heat deflection temperature, 1.80 MPa | 140 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 140 °C | ASTM D 648 | 6.4 mm, unannealed | |||
Koeffizient der thermischen Ausdehnung | 23.0 °C | 2E-5 - 4.3E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 2E-5 - 4.3E-5 1/K | TMA | -30°C to 30°C | ||
Wärmeformbeständigkeitstemperatur | 140 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 140 °C | ||||
Entflammbarkeit | UL Recognized, 94HB Flame Class Rating: 1.5mm UL 94 | ||||
Elektrisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dielectric constant, 60Hz | 23.0 °C | 2.93 [-] Show Supplier Material materials with Dielectric constant, 60Hz of 2.93 [-] | ASTM D 150 | 50/60 Hz |
Sheet resistivity, ROA | 23.0 °C | 1.00E+16 Ω Show Supplier Material materials with Sheet resistivity, ROA of 1.00E+16 Ω | ASTM D 257 |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Schmelzmassenflussrate | 8.3 g/10min Show Supplier Material materials with Schmelzmassenflussrate of 8.3 g/10min | ASTM D 1238 | 300°C/5.0 kgf | |
Schrumpfung | 23.0 °C | 0.2 % Show Supplier Material materials with Schrumpfung of 0.2 % | SABIC method | 3.2 mm |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Hot Water System, Enclosures, Electronic Components, Dishwasher, Meter Water, Pump, Plumbing, Photo/Video Camera | |
| Availability | Asia | |
| Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. | |